SpeedyBee

SpeedyBee F7 V3 Flight Controller BL32 MCU Flight Controller 50A ESC Flight Controller 30x30 flight Controller Stack For Quadcopters High-Performance Flight Controller Powerful Flight Controller For F

SKU RS7365

SpeedyBee F7 V3 Flight Controller BL32 50A 30×30 Stack – your premier choice for superior control and efficient power distribution.

₹14518.80

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

SpeedyBee F7 V3 Flight Controller BL32 50A 30×30 Stack – your premier choice for superior control and efficient power distribution. This dynamic duo features the sophisticated SpeedyBee F7 V3 Flight Controller alongside the powerful SpeedyBee BL32 50A 4-in-1 ESC, crafting an integrated flight system that delivers smooth and responsive flight characteristics.

Specifications:

Product Name SpeedyBee F7 V3 Flight Controller

MCU STM32F722

IMU(Gyro) BMI270

USB Port Type Type-C

Barometer BMP280

OSD Chip AT7456E chip

BLE Bluetooth Supported. Used for Flight Controller configuration, built-in a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip

Flash FC Firmware Wirelessly Supported. Please enter MENU > FC Firmware Flasher

Download/Analyze Blackbox Supported. Please enter MENU > Blackbox Analyzer

DJI Air Unit Connection Way Two ways supported: 6-pin connector or direct soldering.

6-pin DJI Air Unit Plug Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire is needed to be changed.

Flash(for BlackBox) 500MB

BetaFlight Camera Control Pad Yes(CC pad on the front side)

Power Input 3S - 6S Lipo

5V Output 10 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A.

9V Output 2 groups of 9V output, one +9V pad on the front side and the other included in a connector on the bottom side. The total current load is 4A.

3.3V Output Supported. Designed for 3.3V-input receivers. Up to 500mA current load.

4.5V Output Supported. Designed for the receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.

ESC Signal Pads M1 - M4 on the bottom side and M5-M8 on the front side.

CART 5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6)

ESC Telemetry UART R4(UART4)

I2C Supported. SDA & SCL pads on the front side. Used for magnetometer, sonar, etc.

LED Pad Used for WS2812 LED controlled by Betaflight firmware.

Buzzer BZ+ and BZ- pad used for 5V Buzzer

BOOT Button Supported. [A]. Press and hold the BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. [B]. When the FC is powered on and in standby mode, the BOOT button can be used to control the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware.

RSSI Input Supported. Named as RS on the front side.

SmartPort Supported

Supported Flight Controller Firmware BetaFlight(Default),INAV

Firmware Target Name SPEEDYBEEF7V3

Mounting 30.5 x 30.5mm( 4mm hole diameter)

Product Name SpeedyBee BL32 50A 4-in-1 ESC

Firmware SpeedyBee BL32 50A

Configurator Download Link http://github.com/bitdump/BLHeli/releases

Continuous Current 50A * 4

Burst Current 55A(5seconds)

TVS Protective diode Yes

Heat Sink Yes

External Capacitor 1000uF Low ESR Capacitor(In the package)

ESC Protocol DSHOT300/600

PWM Frequency Range 16KHz-128KHz

Power Input 3-6S LiPo

Power Output VBAT

Current Sensor Support (Scale=490 Offset=0)

ESC Telemetry supported

Mounting 30.5 x 30.5mm( 4mm hole diameter)

Features:

Our ESC features a sophisticated 4-level LED battery indicator.

It offers a smooth and seamless flight experience.

It is capable of handling even the most powerful 6S motors with ease.

Package Included:

1 x SpeedyBee F7 V3 Flight Controller

1 x SpeedyBee BL32 50A 4-In-1 ESC

1 x DJI 6pin Cable(80mm)

1 x SH 1.0mm 25mm-Length 8pin Cable(For FC-ESC Connection)

1 x M3*8mm Silicone Grommets(For FC)

1 x M3*8.1mm Silicone Grommets(For ESC)

5 x M3*30mm Iner-Hexagon Screws

5 x M3 Silicone O Ring

5 x M3 Nylon Nut

1 x 35V 1000uF Low ESR Capacitor

1 x XT60 Power Cable(100mm)

1 x 4-pin SH 1.0 To 3+2pin JST1.25 FPV Cam Cable(30mm)

1 x 4-pin SH 1.0 To 3+2pin JST1.25 FPV Cam Cable(60mm)

1 x 4-pin SH 1.0 To 4pin JST1.25 FPV Cam Cable(60mm)

1 x 4-pin SH 1.0 Radio Receiver Cable(100mm)

1 x 4-pin SH1.0 To 4pin SH1.0 Analog VTX Cable

1 x 6-pin SH1.0 GPS Module Cable Without Connector On Another End(100mm)

1 x 6-pin SH1.0 GPS Module Cable Connector Of Another End

Our ESC features a sophisticated 4-level LED battery indicator.

It offers a smooth and seamless flight experience.

It is capable of handling even the most powerful 6S motors with ease.

Specifications

Product Name
SpeedyBee F7 V3 Flight Controller
MCU
STM32F722
IMU(Gyro)
BMI270
USB Port Type
Type-C
Barometer
BMP280
OSD Chip
AT7456E chip
BLE Bluetooth
Supported. Used for Flight Controller configuration, built-in a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip
Flash FC Firmware Wirelessly
Supported. Please enter MENU > FC Firmware Flasher
Download/Analyze Blackbox
Supported. Please enter MENU > Blackbox Analyzer
DJI Air Unit Connection Way
Two ways supported6-pin connector or direct soldering.
6-pin DJI Air Unit Plug
Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire is needed to be changed.
Flash(for BlackBox)
500MB
BetaFlight Camera Control Pad
Yes(CC pad on the front side)
Power Input
3S - 6S Lipo
5V Output
10 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A.
9V Output
2 groups of 9V output, one +9V pad on the front side and the other included in a connector on the bottom side. The total current load is 4A.
3.3V Output
Supported. Designed for 3.3V-input receivers. Up to 500mA current load.
4.5V Output
Supported. Designed for the receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.
ESC Signal Pads
M1 - M4 on the bottom side and M5-M8 on the front side.
CART
5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6)
ESC Telemetry UART
R4(UART4)
I2C
Supported. SDA & SCL pads on the front side. Used for magnetometer, sonar, etc.
LED Pad
Used for WS2812 LED controlled by Betaflight firmware.
Buzzer
BZ+ and BZ- pad used for 5V Buzzer
BOOT Button
Supported.
[A]. Press and hold the BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked.
[B]. When the FC is powered on and in standby mode, the BOOT button can be used to control the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware.
RSSI Input
Supported. Named as RS on the front side.
SmartPort
Supported
Supported Flight Controller Firmware
BetaFlight(Default),INAV
Firmware Target Name
SPEEDYBEEF7V3
Mounting
30.5 x 30.5mm( 4mm hole diameter)
Product Name
SpeedyBee BL32 50A 4-in-1 ESC
Firmware
SpeedyBee BL32 50A
Configurator Download Link
http//github.com/bitdump/BLHeli/releases
Continuous Current
50A * 4
Burst Current
55A(5seconds)
TVS Protective diode
Yes
Heat Sink
Yes
External Capacitor
1000uF Low ESR Capacitor(In the package)
ESC Protocol
DSHOT300/600
PWM Frequency Range
16KHz-128KHz
Power Input
3-6S LiPo
Power Output
VBAT
Current Sensor
Support (Scale=490 Offset=0)
ESC Telemetry
supported
Mounting
30.5 x 30.5mm( 4mm hole diameter)

More in Flight Controllers

You might also need