About this product
Description:
SpeedyBee F405 40A Bluejay 3-6S AIO Flight Controller/ESC - 25.5x25.5mm Boost your drone's speed, stability, and control with the SpeedyBee F405 40A Bluejay 3-6S AIO Flight Controller/ESC. Designed to fit in small spaces with its compact 25.5x25.5mm size, this all-in-one product provides a seamless experience for pilots, making it a must-have for any drone enthusiast.
Specifications:
Flight Controller
Product Name: SpeedyBee F405 AIO
MCU: STM32F405
Gyro: ICM-42688P
USB Port Type: Type-C
Barometer: SPA06-003
OSD: Supported
Bluetooth BLE: Supported, Bluetooth speed enhancement - 2.0
Wireless Flight Controller Firmware Update: Supported (no need to press physical BOOT button)
Wireless Download & BlackBox Analysis: Not supported
DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering
6-pin DJI Sky Port Direct Insertion: Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order
Flash (for BlackBox): 8MB
Betaflight CC Pads (Camera Parameter Adjustment): Supported
Input Voltage: 3S-6S LiPo battery
4V5 Output: Two 4V5 outputs; total current 1A
5V BEC Output: Three 5V outputs; total current 2A; shared with 4V5
9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
MOTOR: M1-M4
UART: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
ESC Telemetry: None
I2C: Supported
LED Pads: Supported, used to control WS2812 LED lights
Buzzer Pads: Supported, BZ+ and BZ- pads
BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
RSSI Pads: None
SmartPort: Not supported
Supported Flight Controller Firmware: BetaFlight (Default), INAV
Firmware Target Name: SPEEDYBEE F405AIO
Mounting: 25.5 x 25.5mm, 3mm hole diameter
ESC
Input Voltage: 3-6S LiPo battery
Continuous Current: 40A
Burst Current: 45A (10s)
ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors, so please use them with caution.
Output Voltage: VBAT battery voltage (used to power the flight controller)
Current Sensor: Supported (Scale = 254, Offset = 0)
Firmware: Bluejay JH-40 48kHz
Features:
40a powerful current, reliable performance.
Rich accessories for easier assembly.
Equipped with a new spa06-003 barometer, precision further improved.
Equipped with lcm-42688 gyroscope, hardware filtering is further enhanced.
Package Included:
1 x SpeedyBee F405 AIO
1 x Soldering Practice Board
1 x DJI Air Unit 6Pin*80mm Connection Cable
1 x 35V 470uF Electrolytic Capacitor
5 x M2 Nylon Hex Nut
4 x M2 * 6.6mm Silicone Dampening Sleeves
5 x M2 Silicone Dampening Ring
1 x (7cm) XT30 Power Cable
1 x BEC
1 x User Manual
1 x Transparent Heat Shrink Tube For External BEC
1 x Type-C Extension Module
1 x Black Heat Shrink Tube For Type-C Extension Module
4 x M2*20mm Screws For F405 AIO & VTX Installation
1 x 6-Pin * 30mm Cable For External BEC
1 x Power Expansion Board
1 x 4-pin * 80mm Cable For Type-C Extension Module
4 x M2*12mm Screws For F405 AIO Installation
2 x Capacitor Heat Shrink Tube
40a powerful current, reliable performance.
Rich accessories for easier assembly.
Equipped with a new spa06-003 barometer, precision further improved.
Equipped with lcm-42688 gyroscope, hardware filtering is further enhanced.