Speed Measuring Sensor Counter Motor Test Groove Coupler Module For Arduino - NB022

SKU NB022

This is a speed sensor groove type optical coupling sensor, the major goal is to check the rate of motor. It was widely used in motor speed detection, pulse count, the position

₹165.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Working Voltage: 3.3~5V

Groove Width: 10mm

Comparator: LM393

Output: Digital Switch Output (0 and 1)

Description: This is a speed sensor groove type optical coupling sensor, the major goal is to check the rate of motor. It was widely used in motor speed detection, pulse count, the position limit, etc. The module can be used in association with a microcontroller for motor speed detection, pulse count, position limit, etc. In principle, any rate meter simply measures the rate at which some event occurs. Usually this is done by counting the events for a given period of time (integration interval) and then simply dividing the number of events by the time to get the rate. Basically, the microcontroller-compatible motor speed sensor module described is a simple device that yields processed pulse trains when the visual path of its optical sensor is physically interrupted by some sort of slotted wheel or similar mechanism (an optical sensor commonly consists of a light emitting diode that provides the illumination, and a phototransistor that senses the presence or absence of that illumination). The transmissive optical sensor used here consists of an infrared light emitting diode and a phototransistor. This both prevents interference from stray external light sources and by having the two components matched for a specific frequency of radiation, they are even more immune to undesired interference. Specification:

Working Voltage: 3.3~5V

Groove Width: 10mm

Comparator: LM393

Output: Digital Switch Output (0 and 1)

Feature:

Using imported groove optical coupling sensor, width 5mm

It have the output state light, if output high level, the lights are off. if output low level ,it on

If it covered,it will output high level;otherwise it output low level

Good signal and waveform, with strong driving ability for more than 15mA

Equipped with a fixed bolt hole, easily install

Use the LM393 wide voltage comparer

Specification:

The DO output interface can be directly connected to a micro-controller IO port, if there is a block detection sensor, such as the speed of the motor encoder can detect.

DO modules can be connected to the relay, limit switch, and other functions, it can also with the active buzzer module, compose alarm.

Wiring Specification:

VCC Connect the positive 3.3 5 v power supply

GND Connect power negative

DO TTL switch signal output

AO This module does not work

Package Included: 1 x Speed Measuring Sensor Module

Specifications

Working Voltage3.3~5V
Groove Width10mm
ComparatorLM393
OutputDigital Switch Output (0 and 1)
The DO output interface can be directly connected to a micro-controller IO port, if there is a block detection sensor, such as the speed of the motor encoder can detect.
DO modules can be connected to the relay, limit switch, and other functions, it can also with the active buzzer module, compose alarm.

More in DC & Geared Motors

You might also need

10 RPM Johnson Geared Motor High Torque Motor - ER008

10 RPM Johnson Geared Motor High Torque Motor - ER008

This johnson geared motor provides torque which falls intermediate to the torques by center shaft gear motors and side shaft dc gear motors, at a reasonable cost.It is a simple DC

₹480.00 GST added at checkout