RCWL-0516 Microwave Radar Motion Sensor Module Human Presence Detection Switch For Arduino ESP32 Raspberry Pi 4-28V - RS2832

SKU RS2832

The RCWL-0516 Microwave Radar Motion Sensor Module is a compact, high-performance 5.8GHz Doppler microwave radar human presence sensor designed for accurate motion and occupancy

₹52.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

The RCWL-0516 Microwave Radar Motion Sensor Module is a compact, high-performance 5.8GHz Doppler microwave radar human presence sensor designed for accurate motion and occupancy detection in smart electronics projects. Unlike conventional PIR sensors, it uses microwave radar technology to detect movement through plastic, glass, and other non-metallic materials, providing higher sensitivity, faster response, and reliable performance in both daylight and complete darkness.

Operating from a wide 4V–28V DC input, the RCWL-0516 outputs a stable digital signal whenever motion is detected, making it easy to interface with Arduino, ESP32, Raspberry Pi, STM32, and other microcontrollers. Its 360° detection capability, low power consumption, compact size, and dependable performance make it an excellent choice for smart lighting, home automation, security systems, occupancy detection, IoT devices, robotics, automatic doors, and industrial automation. Whether you're building DIY electronics or professional embedded systems, the RCWL-0516 offers a reliable, cost-effective, and easy-to-integrate motion sensing solution.

Specification:

Model: RCWL-0516

Type: Microwave Radar Sensor

Operating Voltage: 4-28V

Operating Current: 2.8mA (typical); 3mA (max)

Detection Distance: 5-9m

Transmitting Power: 20mW (typical); 30mW (max)

Output Voltage: 3.2-3.4V

Output Voltage Driving Capacity: 100mA

Trigger Way: repeat trigger

Output Control Low Level: 0V

Output Control High Level: 3.3V

Operating Temperature: -20~80 celsius

Storage Temperature: -40~100 celsius

Features:

Microwave Radar Motion Detection detects human movement using 3.2 GHz Doppler radar technology.

Wide Operating Voltage Supports 4V–28V DC input for versatile applications.

Non-Contact Motion Sensing Detects movement through plastic, glass, and other non-metallic materials.

Long Detection Range Senses motion up to 5–7 metres (depending on environment).

360° Detection Coverage Wide-angle detection with no blind spots.

Low Power Consumption Ideal for battery-powered and energy-efficient projects.

Digital Output Signal Easy interface with Arduino, ESP32, Raspberry Pi, and other microcontrollers.

Compact & Lightweight Design Small PCB for easy installation in DIY and embedded projects.

Pin Description:

3V3: 3V3 power output

GND: Ground

OUT: Control output: when detecting moving objects, it will output a high level.

VIN: Input voltage, 4-28V

CDS: Enable control chip, lower than 0.7V, OUT will output low level all the time

Adjustment Part Introduction:

C-TM: Adjust repeat trigger time; the default trigger time is 2s. Increasing the capacitor's capacity will make the repeat trigger time longer, and the actual counting trigger time can operate as below: Stick capacitor on C-TM, test 9196 3-pin frequency F, repeat trigger time T=(1/f)*32768

R-GN detection distance adjustment: connect with the resistor and the detection distance will become shorter; if not connected, the detection distance is 7m; if connected with a 1M ohm resistor, the detection distance is 5m

R-CDS   Internal VCC parallel connects with an internal 1M ohm resistor to the CDS pin (that is, 196 9-pin) by R-CDS; CDS connects with the photoresist, so you can close detection function at night

Package Included:

1 x RCWL-0516 Microwave Radar Motion Sensor Module

Microwave Radar Motion Detection detects human movement using 3.2 GHz Doppler radar technology.

Wide Operating Voltage Supports 4V–28V DC input for versatile applications.

Non-Contact Motion Sensing Detects movement through plastic, glass, and other non-metallic materials.

Long Detection Range Senses motion up to 5–7 metres (depending on environment).

360° Detection Coverage Wide-angle detection with no blind spots.

Low Power Consumption Ideal for battery-powered and energy-efficient projects.

Digital Output Signal Easy interface with Arduino, ESP32, Raspberry Pi, and other microcontrollers.

Compact & Lightweight Design Small PCB for easy installation in DIY and embedded projects.

Specifications

ModelRCWL-0516
TypeMicrowave Radar Sensor
Operating Voltage4-28V
Operating Current2.8mA (typical); 3mA (max)
Detection Distance5-9m
Transmitting Power20mW (typical); 30mW (max)
Output Voltage3.2-3.4V
Output Voltage Driving Capacity100mA
Trigger Wayrepeat trigger
Output Control Low Level0V
Output Control High Level3.3V
Operating Temperature-20~80 celsius
Storage Temperature-40~100 celsius

More in Motion Sensors

You might also need