About this product
Raspberry Pi 4 Model B 8GB Ultimate Kit
A Raspberry Pi 4 Model B bundle for learning Linux, running a small desktop and experimenting with simple sensor projects. This version pairs the 8GB board with the accessories itemized below. It is a kit, not a board-only listing.
Package includes
Component
Quantity
Raspberry Pi 4 Model B with 8GB RAM
1 board
Enclosure for Raspberry Pi 4
1 case
Heatsink
1 cooling item
Micro-HDMI to HDMI cable
1 cable
32GB Class 10 microSD memory card
1 card
Ethernet network cable
1 cable
Infrared proximity sensor
1 module
Buzzer module
1 module
Power adapter
1 adapter
This component list does not promise a separate cooling fan or printed manual. Card brand, preinstalled software, cable length, case colour and the number of individual pieces within the heatsink item are not specified. The contents guide illustrates component types; it is not a photograph of the packed kit.
Board specifications
Raspberry Pi 4 Model B, 8GB LPDDR4 RAM.
Broadcom BCM2711 quad-core Cortex-A72 64-bit processor.
Dual-band 2.4GHz/5GHz wireless LAN, Bluetooth 5.0 and Gigabit Ethernet.
Two USB 3.0 ports and two USB 2.0 ports.
Two micro-HDMI display outputs and a 40-pin GPIO header.
microSD storage slot; USB-C power input. The board requires a suitable 5V supply rated for at least 3A.
Before first use
A display, keyboard and mouse are needed for a conventional desktop setup and are not listed in this package. Install a suitable operating-system image on the microSD card using Raspberry Pi Imager unless the card has already been prepared. Insert the card, fit the board and cooling parts correctly, connect the display and peripherals, then connect power last.
Raspberry Pi GPIO uses 3.3V logic and is not 5V tolerant. Check the sensor module pin labels and output voltage before wiring it to the Pi. Disconnect power before changing connections; use a suitable level shifter if a module output can exceed 3.3V. Do not drive a buzzer or other load beyond the GPIO rating directly from a pin.