PWM to Voltage Converter Module PWM to Voltage 0-100% to-10V Converter Module - RS3141

SKU RS3141

PWM to Voltage Converter Module can convert PWM digital signals into 0 to 10V analogue signals. This PWM to Voltage Converter Module can be used in the PLC or other industrial

₹208.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

PWM to Voltage Converter Module can convert PWM digital signals into 0 to 10V analogue signals. This PWM to Voltage Converter Module can be used in the PLC or other industrial panel switch signal interface by adjusting the PWM duty ratios to adjust the output voltage. Module size is small and easy to apply in different places.

Specifications:

Operating Voltage: 12V ~ 30V DC

Conversion Range: 0% -100% PWM to 0-10v voltage

PWM signal reception frequency range: 1KHz – 3KHz

Allowable Error: 5%

Features:

PWM to Voltage Converter Module uses single-chip embedded technology

Easy to operate, can be fine-tuned by potentiometer

Select the PWM signal input level range through the short-cap

The PWM to Voltage Converter Module is small, easy to carry and use

PWM signal input level range: The peak of 4.5V to 10V level. The short cap installs in ‘5V’. This level is used for the normal controllers or 5V MCU. Insert jumper in the inner side.

PWM signal input level range: The peak of 12V to 24V level, so inserted in 24V. The short cap installs in ‘24V’. This level is used for normal PLC controllers. Insert jumper in the outer side.

Pin Description:

VCC: Working power 12-30V

GND: Ground

PWM: Input PWM signal positive

GND: Input voltage ground

VOUT: Output voltage: 0-10V

GND: Output ground

Package Included:

1 x PWM to Voltage Converter Module PWM to Voltage 0-100% to-10V Converter Module

PWM to Voltage Converter Module uses single-chip embedded technology

Easy to operate, can be fine-tuned by potentiometer

Select the PWM signal input level range through the short-cap

The PWM to Voltage Converter Module is small, easy to carry and use

PWM signal input level range: The peak of 4.5V to 10V level. The short cap installs in ‘5V’. This level is used for the normal controllers or 5V MCU. Insert jumper in the inner side.

PWM signal input level range: The peak of 12V to 24V level, so inserted in 24V. The short cap installs in ‘24V’. This level is used for normal PLC controllers. Insert jumper in the outer side.

Specifications

Operating Voltage12V ~ 30V DC
Conversion Range0% -100% PWM to 0-10v voltage
PWM signal reception frequency range1KHz – 3KHz
Allowable Error5%

More in DC & Geared Motors

You might also need

10 RPM Johnson Geared Motor High Torque Motor - ER008

10 RPM Johnson Geared Motor High Torque Motor - ER008

This johnson geared motor provides torque which falls intermediate to the torques by center shaft gear motors and side shaft dc gear motors, at a reasonable cost.It is a simple DC

₹480.00 GST added at checkout