About this product
Hardware Required
Arduino Uno With USB Cable - 1
Passive Buzzer module - 1
9v Battery - 1
Snapper With DC Jack - 1
Jumper wire (male to male) - 40 pcs
Breadboard 170 pt - 1
Introduction
In this project, we will know the basic functionality of passive buzzer as it can generate various tones such as ‘Happy Birthday’ or any particular tone.
HARDWARE REQUIRED
Arduino Uno With USB Cable - 1
Passive Buzzer module - 1
9v Battery - 1
Snapper With DC Jack - 1
Jumper wire (male to male) - 40 pcs
Breadboard 170 pt - 1
SOFTWARE REQUIRED
Arduino IDE 1.8.5 (programmable platform for Arduino)
Click To Download: https://www.arduino.cc/en/Main/Software
SPECIFICATIONS
Passive Buzzer Module
Arduino Passive Piezoelectric Buzzer Module can produce a range of sound tones depending on the input frequency. It consists of a passive piezoelectric buzzer, it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.
Operating Voltage: 1.5~15V DC
Tone Generation Range: 1.5~2.5kHz
Dimensions: 18.5mm*15mm
Arduino Uno
CIRCUIT CONNECTION
Connect GND of a buzzer with GND of Arduino Uno.
Connect VCC of a buzzer with Pin 5V of Arduino Uno.
Connect Pin Signal of a buzzer with Digital Pin 9 of Arduino Uno.
CODE
https://drive.google.com/open?id=10oXCCCh9EbD21TT2bo9fDn-sL9jf-2nI
WORKING
Welcome to the Arduino Based Project which consists of Passive Buzzer. The basic working principle of Passive buzzer is being described here. A passive buzzer requires an AC signal to make a sound. It is like an electromagnetic speaker, where a changing input signal produces the sound, rather than producing a tone automatically.
Here, we have generated a tone from Passive buzzer. It can be done by PWM on the Arduino which can be used to control the pitch and the volume at the same time.