About this product
Description:
The OV2640 3D Measurement Camera Module is made with two 1/4-inch OV2640 million HD CMOS sensors. It has high sensitivity, high flexibility, and support for JPEG output. It can work in the same way as binocular camera, and can be applied to many occasions such as binocular ranging, 3D measurement and so on.
The 3D Stereo Camera Module can be driven by STM32, which is very convenient to use, and the camera configuration can be freely carried out, which greatly increases the flexibility of the application.
Specifications:
Sensor size: 1/4 inch
Pixel: 1600*1200 (200W)
Control interface: SCCB
Working voltage: 3.3V
Module size: 27mmX27mm
Output format: RGB565/JPEG/YUV/YCbCr, etc.
Sensitivity: 0.6V/Lux-sec
Signal-to-noise ratio: 40dB
Dynamic range: 50dB
Lens aperture: F2.0
Lens filter: 850nm, infrared filter
Working temperature: -30~+70
Power consumption: 40mA
IO port level: 2.8v LVTTL, compatible with 3.3V
Output bit width: 8 bits
Data interface: 8-bit data
Control interface: SCCB (Class IIC protocol)
Output format: RawRGB, RGB (RGB565/RGB555), GRB422, YUV (422/420), YCbCr (422), JPEG data
Features:
Built-in embedded microprocessor
Support for image scaling, panning, and window settings
Support image compression to output JPEG image data
Integrated active crystal 12M, no external clock required
Integrated LDO, only need to supply 3.3V to work properly
Support UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and various sizes up to 40x30 size
High sensitivity, low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565/555/444)
YUV (4:2:2) and YCbCr (4:2:2) output formats
Package Included:
1 x OV2640 Binocular Camera Module CMOS STM32 Driver 3.3v 1600*1200 for 3D Measurement with SCCB Interface.
Built-in embedded microprocessor
Support for image scaling, panning, and window settings
Support image compression to output JPEG image data
Integrated active crystal 12M, no external clock required
Integrated LDO, only need to supply 3.3V to work properly
Support UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and various sizes up to 40x30 size
High sensitivity, low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565/555/444)
YUV (4:2:2) and YCbCr (4:2:2) output formats