About this product
Description:
OPA627 Precision Op Amp Module is a single-channel amplifier module designed for SOP 8 package single op-amp. The module function and chip model are highly compatible. It is basically suitable for most single-op-amp chips of the SOP8 series on the market, and it is very convenient to use. The input and output of the signal adopt the coaxial SM high-frequency connector
High-Speed High Impedance Op Amp input and output of the signal adopts the coaxial high-frequency wire connector, which can reduce the signal loss and shield the interference of other signals. At the same time, the on-board operational amplifier can freely change the function according to the needs of users. Function
It can be changed to the sa 3, and can be changed to shoot with the output; me phase. Amplifier 2, can be changed into an inverting amplifier; 3, can be changed to shoot with the output;
Specifications:
Module Model: OPA627
Module Type: Precision Operational Amplifier
Input Signal Form: Single-Ended
Input Voltage Range: 2Vpp (MAX), Generally Within The Power Supply
Module Input Impedance: 1KΩ
Module Power Supply Voltage: ±18V (MAX),
Module Power Supply Current: <100mA, For Reference Only, This Parameter Will Be
Different Depending On The Op Amp Chip (subject to the chip data manual), the
General Module quiescent current is about a few milliamperes
Module output impedance: low impedance
Output voltage range: ±15V (MAX)
Output current: ±45mA (MAX)
Gain bandwidth product: 16MHz, bandwidth decreases as gain increases
Module gain range: 100 times (MAX)
Chip input offset voltage: 500uV(MAX)
Chip input offset drift: 2.5uV/°C (MAX)
Chip input bias current: 5pA(MAX)
Chip input voltage noise: 5.2nV/Hz (1KHz )
Module protection: Yes, diode anti-reverse connection protection
Module weight: 16g
Module specification: 50*36*23mm, length*width*height-PCB size
Module heating: no heat sink, low power consumption, no need for heat dissipation
Module heating factor: the input and output voltage is too large or the module chip is damaged
Module working temperature: -40℃~+75℃, industrial grade
Features:
positive and negative power LED indication.
potentiometer adjustable magnification
Application range: weak signal amplification, acquisition front-end amplification, etc.
Module interface type: SMA signal signal input and output, 5. 08 blue power card line seat
Pin Description:
Package Included:
1 x OPA627 Precision Op Amp Module
positive and negative power LED indication.
potentiometer adjustable magnification
Application range: weak signal amplification, acquisition front-end amplification, etc.
Module interface type: SMA signal signal input and output, 5. 08 blue power card line seat