About this product
Description:
Meet the Arduino Nano RP2040 Connect, the only connected RP2040 board that packs BIG features into a compact Arduino Nano form factor. Powered by the dual-core Raspberry Pi RP2040 (133MHz, 264KB SRAM, 16MB Flash), its true strength lies in its onboard WiFi and Bluetooth connectivity via the u-Blox NINA-W102. Full Arduino Cloud compatibility, a 9-axis IMU, and a built-in microphone transform your projects into powerful, connected creations. It's the premium choice for upgrading or unlocking new IoT possibilities.
Specifications:
Board
Nano RP2040 Connect
SKU: ABX00052
Microcontroller
Raspberry Pi® RP2040
USB connector
Micro USB
Pins
Built-in LED pin
13
Digital I/O Pins
20
Analog Input Pins
8
PWM pins
20 (Except A6, A7)
External interrupts
20 (Except A6, A7)
Connectivity
Wi-Fi
Nina W102 uBlox module
Bluetooth®
Nina W102 uBlox module
Secure element
ATECC608A-MAHDA-T Crypto IC
Sensors
IMU
LSM6DSOXTR (6-axis)
Microphone
MP3DT06JTR
Communication
UART
Yes
I2C
Yes
SPI
Yes
Power
Circuit operating voltage
3.3V
Input Voltage (VIN)
4-20V
DC Current per I/O pin
8 mA
Clock speed
Processor
133 MHz
Memory
AT25SF128A-MHB-T
16MB Flash IC
Nina W102 uBlox module
448 KB ROM, 520KB SRAM, 16MB Flash
Dimensions
Weight
6 g
Width
18 mm
Length
45 mm
Features:
Raspberry Pi RP2040 Microcontroller:
133MHz 32bit Dual Core Arm Cortex-M0+
264kB on-chip SRAM
Direct Memory Access (DMA) controller
Support for up to 16MB of off-chip Flash memory via a dedicated QSPI bus
USB 1.1 controller and PHY, with host and device support
8 PIO state machines
Programmable IO (PIO) for extended peripheral support
4-channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion
SWD Debugging
2 on-chip PLLs to generate USB and core clock
40nm process node
Multiple power mode support
USB 1.1 Host/Device
Internal Voltage Regulator to supply the core voltage
Advanced High-performance Bus (AHB)/Advanced Peripheral Bus (APB)
U-blox® Nina W102 WiFi/Bluetooth Module:
240MHz 32bit Dual Core Xtensa LX6
520kB on-chip SRAM
448 Kbyte ROM for booting and core functions
16 Mbit FLASH for code storage including hardware encryption to protect programs
and data
1 kbit EFUSE (non-erasable memory) for MAC addresses, module configuration,
Flash-Encryption, and Chip-ID
IEEE 802.11b/g/n single-band 2.4 GHz WiFi operation
Bluetooth 4.2
Integrated Planar Inverted-F Antenna (PIFA)
4x 12-bit ADC
3x I2C, SDIO, CAN, QSPI
Memory:
AT25SF128A 16MB NOR Flash
QSPI data transfer rate up to 532Mbps
100K program/erase cycles
Useful Link:
Arduino Nano RP2040 Connect datasheet
Package Included:
1 x Arduino Nano RP2040 Connect without Header