Obstacle Avoidance Module Infrared Obstacle Avoidance Sensor Module - RS3824

SKU RS3824

The Obstacle Avoidance Module comes as an assembled module, as shown above, there are only four pins: +5-volts, GND, output, and EN.

₹97.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

The Obstacle Avoidance Module comes as an assembled module, as shown above, there are only four pins: +5-volts, GND, output, and EN. Output is an active LOW and has an onboard status LED. The Obstacle Avoidance Module is very easy to interface directly with Arduino or other micro-controllers. Obstacle Avoidance Module also works with the Raspberry Pi with a voltage range of 3-6 volts. Connect Vcc to 3-volts!

The enable pin EN will disable the device when HI (Vcc) and enable it when LO (GND). The onboard jumper can be left open to allow external control of enable/disable of the module. I see no use for this function and would leave the jumper on and the pin disconnected. There are two potentiometers on the module one controlling operating frequency (centred at 38 kHz) and the other controlling intensity.

Specifications:

Working Voltage: DC 3.3V 5V

Working Current: More than 20mA

Working Temperature: -10~50°C

Detection Distance: 2~40cm

IO Interface: 4 line (- / + / S / EN)

Output Signal: TTL Level

Adjusting Mode: Multi-resistance regulation

Effective Angle: 35°

features:

The comparator using LM393, is stable.

With the screw holes of 3mm, easy to install.

Package Included:

1 x Obstacle Avoidance Module Infrared Obstacle Avoidance Sensor Module

The comparator using LM393, is stable.

With the screw holes of 3mm, easy to install.

Specifications

Working VoltageDC 3.3V 5V
Working CurrentMore than 20mA
Working Temperature-10~50°C
Detection Distance2~40cm
IO Interface4 line (- / + / S / EN)
Output SignalTTL Level
Adjusting ModeMulti-resistance regulation
Effective Angle35°

More in Sensor Modules

You might also need