About this product
Power Supply Voltage: 2.7V-3.3V
Data Interface Level: 2.7-3.3V
Backlight Power Supply Voltage: Highest 3.3V
Module Size: 43.6mm x 43.1mm(width X height)
Installation Diameter: 2mm
Description:
This is a quick tutorial for our 84x48 pixel monochrome LCD display. These displays are small, only about 1.5" diameter, but very readable due and comes with a backlight. This display is made of 84x48 individual pixels, so you can use it for graphics, text or bitmaps. These displays are inexpensive, easy to use, require only a few digital I/O pins and are fairly low power as well. To drive the display, you will need 3 to 5 digital output pins (depending on whether you want to manually control the chip select and reset lines). Another pin can be used to control (via on/off or PWM) the backlight. To make things easy for you, we've written a nice graphics library that can print text, pixels, rectangles, circles and lines! The library is written for the Arduino but can easily be ported to your favourite microcontroller.
Specification:
Power Supply Voltage: 2.7V-3.3V
Data Interface Level: 2.7-3.3V
Backlight Power Supply Voltage: Highest 3.3V
Module Size: 43.6mm x 43.1mm(width X height)
Installation Diameter: 2mm
Features:
Brand new and high-quality product
Low-cost monochrome graphical display
Blue backlight
Built-in PCD8544 Lcd controller
84 X 48 dots matrix
Serial interface maximum of 4.0 Mbits/s
CMOS compatible inputs
Low power consumption suitable for battery operated systems
Working voltage: 3V to 5V
Interfacing With Arduino:
Arduino Pro Mini 3.3V
Olimexino-32U4 (Jumper 3.3V!)
Nokia 5110 display
D3
RST
D4
CE
D5
DC
D6
DIN
D7
CLK
VCC (3.3V)
VCC
GND
LIGHT
GND
GND
Package Included:
1 x Nokia 5110 LCD Module
Brand new and high-quality product
Low-cost monochrome graphical display
Blue backlight
Built-in PCD8544 Lcd controller
84 X 48 dots matrix
Serial interface maximum of 4.0 Mbits/s
CMOS compatible inputs
Low power consumption suitable for battery operated systems
Working voltage: 3V to 5V