N20 Gear Motor N20 3V 35 RPM Micro Metal Gear Motor With Encoder N20 Motor - RS4804

SKU RS4804

This is an N20 Gear Motor N20 3V 35 RPM Micro Metal Gear Motor With Encoder N20 Motor. These N20 3V 35RPM Micro Metal Gear Motor With Encoder is intended for use at 3V.

₹793.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

This is an N20 Gear Motor N20 3V 35 RPM Micro Metal Gear Motor With Encoder N20 Motor.  These N20 3V 35RPM Micro Metal Gear Motor With Encoder is intended for use at 3V. Though in general, these kinds of motors can run at voltages above and below this nominal voltage; so they should comfortably operate till the 3V (rotation can start at voltages as low as 0.5 V).

Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gear motors are available in a wide range of gear ratios—from 5:1 up to 1000:1. Except 1000:1 gear ratio versions, all of the micro metal gear motors have the same physical dimensions; so one version can be easily swapped for another if your design requirements change.

Specifications:

Model No.: GA12 N20

No Load Current: 10mA

No load Speed: 35RPM

Rated Speed: 30RPM

Rated Current: 20mA

Rated Torque: 0.24kg-cm

Stall Current: 1A

Stall Torque: 2.0kg-cm

Gear Ratio: 298:1

Shaft Type: D-type, Single Side

Shaft Diameter: 3mm

Features:

This is a DC Mini Metal Gear Motor, ideal for making robots

Lightweight, high torque and low RPM.

Fine craftsmanship, durable, not easy to wear.

With excellent stall characteristics, can climb hills easily.

You can also easily mount a wheel on the motor’s output shaft.

Count: 3PPR(Pulse per Revolutions).

Motor Size: 15 x 12 x 10 mm.

Package Included:

1 x N20 Gear Motor N20 3V 35 RPM Micro Metal Gear Motor With Encoder N20 Motor

This is a DC Mini Metal Gear Motor, ideal for making robots

Lightweight, high torque and low RPM.

Fine craftsmanship, durable, not easy to wear.

With excellent stall characteristics, can climb hills easily.

You can also easily mount a wheel on the motor’s output shaft.

Count: 3PPR(Pulse per Revolutions).

Motor Size: 15 x 12 x 10 mm.

Specifications

Model No.GA12 N20
No Load Current10mA
No load Speed35RPM
Rated Speed30RPM
Rated Current20mA
Rated Torque0.24kg-cm
Stall Current1A
Stall Torque2.0kg-cm
Gear Ratio298:1
Shaft TypeD-type, Single Side
Shaft Diameter3mm

More in DC & Geared Motors

You might also need

10 RPM Johnson Geared Motor High Torque Motor - ER008

10 RPM Johnson Geared Motor High Torque Motor - ER008

This johnson geared motor provides torque which falls intermediate to the torques by center shaft gear motors and side shaft dc gear motors, at a reasonable cost.It is a simple DC

₹480.00 GST added at checkout