MPR121 Breakout V12 Building A Custom I2C Touch Sensor Keyboard DIY Touch Sensor Keyboard Capacitive Touch Sensor Breakout Board - NA079

SKU NA079

This MPR121 Breakout V12 is a breakout board for Freescale's MPR121QR2 The MPR121 is a capacitive touch sensor controller driven by an I2C interface The chip can control up to

₹145.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

This MPR121 Breakout V12 is a breakout board for Freescale's MPR121QR2 The MPR121 is a capacitive touch sensor controller driven by an I2C interface The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode The MPR121 also features eight LED driving... pins. When these pins are not configured as electrodes, they may be used to drive LEDs.

There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you do not require the pull-up resistors you can open the jumpers by cutting the trace connecting them.

There I2C Touch Sensor Keyboard is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC. The VREG pin is connected through a 0.1uF capacitor to ground, which means, unless you modify the board, you can not operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).

Specifications:

Model: MPR121

Operating Voltage: 2.5 to 3.6VDC

Interface: I2C

Features:

This is a breakout board for Freescale's MPR121QR2.

The MPR121 is a capacitive touch sensor controller driven by an I2C interface.

The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode.

The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs.

Package Included:

1 x MPR121 Breakout V12 Building A Custom I2C Touch Sensor Keyboard DIY Touch Sensor Keyboard Capacitive Touch Sensor Breakout Board

This is a breakout board for Freescale's MPR121QR2.

The MPR121 is a capacitive touch sensor controller driven by an I2C interface.

The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode.

The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs.

Specifications

ModelMPR121
Operating Voltage2.5 to 3.6VDC
InterfaceI2C

More in Touch Sensors

You might also need