About this product
Mornsun LO65-10B24 Power Supply
The Mornsun LO65-10B24 is an open-frame AC-DC switching power supply providing a regulated 24V DC output at up to 2.71A, with a rated output power of 65W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
An open-frame board-level supply: it is designed to be built into a finished product with its own protective enclosure, not used as a standalone adapter. Output voltage is fixed (no adjustment potentiometer).
Key Features
87% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Open-frame PCB-mount construction for integration into finished equipment.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LO65-10B24
Nominal output
24V DC / 2.71A
Rated output power
65W
AC input
85-264VAC
DC input
100-370VDC
Typical efficiency at 230VAC
87%
Maximum capacitive load
1500µF
Input-output isolation test
3000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
76.2 × 50.8 × 30mm
Cooling
Free air convection
Selection and Installation
Match the output voltage to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LO65-10B24 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
87% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Open-frame PCB-mount construction for integration into finished equipment.
Free air convection. Allow suitable airflow and installation clearance.