About this product
Mornsun LMF75-23B05 Power Supply
The Mornsun LMF75-23B05 is an enclosed AC-DC switching power supply providing a regulated 5V DC output at up to 15A, with a rated output power of 75W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
A 5V model rated at 75W with a high 15A output current, suited to LED arrays, microcontrollers and USB-powered logic that need a strong 5V rail. The wide 85-305VAC input range suits equipment fed from unstable mains. Built-in active PFC keeps the power factor high and reduces harmonic load on the mains supply.
Key Features
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LMF75-23B05
Nominal output
5V DC / 15A
Rated output power
75W
AC input
85-305VAC
DC input
120-430VDC
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
159 × 97 × 30mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LMF75-23B05 power supply.
Product images are for reference; follow the supplied unit's markings and documentation.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.