About this product
Mornsun LMF600-20B24 Power Supply
The Mornsun LMF600-20B24 is an enclosed AC-DC switching power supply providing a regulated 24V DC output at up to 25A, with a rated output power of 600W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
Its output adjustment range (23.5-25.2V) is narrower than most models. With an AC input between 80-100VAC, output power must be derated per the datasheet curve. It uses forced air cooling; keep the fan intake and exhaust clear.
Key Features
Adjustable DC output (23.5-25.2V) for compatible equipment and control circuits.
92% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Built-in active PFC for stable operation on varying mains.
Enclosed metal chassis with screw-terminal connections.
Forced air cooling (built-in fan). Allow suitable airflow and installation clearance.
Technical Specifications
Model
LMF600-20B24
Nominal output
24V DC / 25A
Rated output power
600W
Output adjustment
23.5-25.2V DC
AC input
80-277VAC
DC input
110-390VDC
Typical efficiency at 230VAC
92%
Maximum capacitive load
50000µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
203.1 × 101.6 × 40.6mm
Cooling
Forced air cooling (built-in fan)
Power factor correction
Built-in active PFC
Selection and Installation
Match the output voltage to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LMF600-20B24 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (23.5-25.2V) for compatible equipment and control circuits.
92% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Built-in active PFC for stable operation on varying mains.
Enclosed metal chassis with screw-terminal connections.
Forced air cooling (built-in fan). Allow suitable airflow and installation clearance.