About this product
Mornsun LMF600-20B15 Power Supply
The Mornsun LMF600-20B15 is an enclosed AC-DC switching power supply providing a regulated 15V DC output at up to 40A, with a rated output power of 600W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
A 15V model rated at the full 600W of the series name, with a high 40A output current. A separate 5V/1A standby output is provided for auxiliary circuits. Built-in active PFC keeps the power factor high and reduces harmonic load on the mains supply. A built-in DC fan provides forced-air cooling; keep the vents unobstructed and expect audible fan noise in quiet environments. Remote sense compensation keeps the output voltage accurate at the load, and a remote ON/OFF input allows external control.
Key Features
Adjustable DC output (14.7-15.8V) for compatible equipment and control circuits.
92% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Built-in DC fan (forced air cooling). Allow suitable airflow and installation clearance.
Technical Specifications
Model
LMF600-20B15
Nominal output
15V DC / 40A
Rated output power
600W
Output adjustment
14.7-15.8V DC
AC input
80-277VAC
DC input
110-390VDC
Typical efficiency at 230VAC
92%
Maximum capacitive load
50000µF
Input-output isolation test
4000VAC
Operating temperature
-40°C to +70°C, with derating above +50°C
Dimensions
203.1 × 101.6 × 40.6mm
Cooling
Built-in DC fan (forced air cooling)
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LMF600-20B15 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (14.7-15.8V) for compatible equipment and control circuits.
92% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Built-in DC fan (forced air cooling). Allow suitable airflow and installation clearance.