About this product
Mornsun LMF500-20B27 Power Supply
The Mornsun LMF500-20B27 is an enclosed AC-DC switching power supply providing a regulated 27V DC output at up to 18.6A, with a rated output power of 502.2W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This model is rated at 502.2W, slightly above the 500W series name. Built-in active PFC keeps the power factor high and reduces harmonic load on the mains supply. A built-in DC fan provides forced-air cooling; keep the vents unobstructed and expect audible fan noise in quiet environments. Remote sense compensation keeps the output voltage accurate at the load, and a remote ON/OFF input allows external control.
Key Features
Adjustable DC output (25.65-28.35V) for compatible equipment and control circuits.
93% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Built-in DC fan (forced air cooling). Allow suitable airflow and installation clearance.
Technical Specifications
Model
LMF500-20B27
Nominal output
27V DC / 18.6A
Rated output power
502.2W
Output adjustment
25.65-28.35V DC
AC input
80-264VAC
DC input
110-370VDC
Typical efficiency at 230VAC
93%
Maximum capacitive load
6000µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
203.1 × 101.6 × 40.6mm
Cooling
Built-in DC fan (forced air cooling)
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LMF500-20B27 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (25.65-28.35V) for compatible equipment and control circuits.
93% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Built-in DC fan (forced air cooling). Allow suitable airflow and installation clearance.