About this product
Mornsun LMF500-20B24 Power Supply
The Mornsun LMF500-20B24 is an enclosed AC-DC switching power supply providing a regulated 24V DC output at up to 20.9A, with a rated output power of 501.6W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This 24V model is rated at 501.6W. Its output adjustment range (22.8-25.2V) is narrower than most models. With an AC input between 80-100VAC, output power must be derated per the datasheet curve. It uses forced air cooling; keep ventilation paths clear.
Key Features
Adjustable DC output (22.8-25.2V) for compatible equipment and control circuits.
93% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Built-in active PFC for stable operation on varying mains.
Forced air cooling (built-in fan). Allow suitable airflow and installation clearance.
Technical Specifications
Model
LMF500-20B24
Nominal output
24V DC / 20.9A
Rated output power
501.6W
Output adjustment
22.8-25.2V DC
AC input
80-264VAC
DC input
110-370VDC
Typical efficiency at 230VAC
93%
Maximum capacitive load
300µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
203.1 × 101.6 × 40.6mm
Cooling
Forced air cooling (built-in fan)
Power factor correction
Built-in active PFC
Selection and Installation
Match the output voltage to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LMF500-20B24 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (22.8-25.2V) for compatible equipment and control circuits.
93% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Built-in active PFC for stable operation on varying mains.
Forced air cooling (built-in fan). Allow suitable airflow and installation clearance.