About this product
Mornsun LMF1000-20B27 Power Supply
The Mornsun LMF1000-20B27 is an enclosed AC-DC switching power supply providing a regulated 27V DC output at up to 37.3A, with a rated output power of 1007W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
The series name is LMF1000; this 27V variant delivers 1007W at 37.3A on the main output, plus a separate 10W auxiliary 5V/2A rail. Built-in active PFC keeps the power factor high and reduces harmonic load on the mains supply. A built-in DC fan provides forced-air cooling; keep the vents unobstructed and expect audible fan noise in quiet environments. Important: before powering on, the PS_ON jumper between Pin6 (PS_ON) and Pin7 (GND) on the control terminal must be shorted or the unit gives no output; see the datasheet note.
Key Features
Adjustable DC output (27-32.4V) for compatible equipment and control circuits.
92% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Built-in DC fan (forced air cooling). Allow suitable airflow and installation clearance.
Technical Specifications
Model
LMF1000-20B27
Nominal output
27V DC / 37.3A
Rated output power
1007W
Output adjustment
27-32.4V DC
AC input
90-264VAC
DC input
120-370VDC
Typical efficiency at 230VAC
92%
Maximum capacitive load
8000 (main) / 1000 (aux)µF
Input-output isolation test
4000VAC
Operating temperature
-40°C to +70°C, with derating above +50°C
Dimensions
190 × 127 × 40.5mm
Cooling
Built-in DC fan (forced air cooling)
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LMF1000-20B27 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (27-32.4V) for compatible equipment and control circuits.
92% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Built-in DC fan (forced air cooling). Allow suitable airflow and installation clearance.