About this product
Mornsun LMF1000-20B15 Power Supply
The Mornsun LMF1000-20B15 is an enclosed AC-DC switching power supply providing 15V DC at up to 64A + 5V DC auxiliary at up to 2A, with a rated output power of 960W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
The series name is LMF1000; this 15V variant delivers 960W at 64A on the main output, plus a separate 10W auxiliary 5V/2A rail. It uses forced air cooling; keep the fan intake and exhaust clear. With an AC input between 90-100VAC, output power must be derated per the datasheet curve.
Key Features
Adjustable DC output (15-18V) for compatible equipment and control circuits.
92% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Built-in active PFC for stable operation on varying mains.
Enclosed metal chassis with screw-terminal connections.
Forced air cooling (built-in fan). Allow suitable airflow and installation clearance.
Technical Specifications
Model
LMF1000-20B15
Nominal outputs
15V DC / 64A; 5V DC auxiliary / 2A
Rated output power
960W
Output adjustment
15-18V DC
AC input
90-264VAC
DC input
120-370VDC
Typical efficiency at 230VAC
92%
Maximum capacitive load
20000 (main) / 1000 (aux)µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
190 × 127 × 40.5mm
Cooling
Forced air cooling (built-in fan)
Power factor correction
Built-in active PFC
Selection and Installation
Match the output voltage to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LMF1000-20B15 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (15-18V) for compatible equipment and control circuits.
92% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Built-in active PFC for stable operation on varying mains.
Enclosed metal chassis with screw-terminal connections.
Forced air cooling (built-in fan). Allow suitable airflow and installation clearance.