About this product
Mornsun LM75-10D0512-30 Power Supply
The Mornsun LM75-10D0512-30 is an enclosed AC-DC switching power supply providing +5V DC at up to 7A + +12V DC at up to 3A, with a rated output power of 71W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This is a dual-output supply providing +5V and +12V rails together. Working current ranges are 0.7-8.0A on +5V and 0.3-4.0A on +12V; if both outputs approach their maximum current at the same time, the total output power must not exceed the rated 71W.
Key Features
82% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LM75-10D0512-30
Nominal outputs
+5V DC / 7A; +12V DC / 3A
Rated output power
71W
AC input
90-264VAC
DC input
120-373VDC
Typical efficiency at 230VAC
82%
Maximum capacitive load
7000 (+5V) / 3000 (+12V)µF
Input-output isolation test
3000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
129 × 97 × 30mm
Cooling
Free air convection
Selection and Installation
Match the output voltage to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LM75-10D0512-30 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
82% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.