About this product
Mornsun LM50-23B15 Power Supply
The Mornsun LM50-23B15 is an enclosed AC-DC switching power supply providing a regulated 15V DC output at up to 3.4A, with a rated output power of 51W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This model is rated at 51W, slightly above the 50W series name. The wide 85-305VAC input range suits equipment fed from unstable mains.
Key Features
Adjustable DC output (13.5-18V) for compatible equipment and control circuits.
87% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LM50-23B15
Nominal output
15V DC / 3.4A
Rated output power
51W
Output adjustment
13.5-18V DC
AC input
85-305VAC
DC input
120-430VDC
Typical efficiency at 230VAC
87%
Maximum capacitive load
1500µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
99 × 82 × 30mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LM50-23B15 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (13.5-18V) for compatible equipment and control circuits.
87% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.