About this product
Mornsun LM50-22B36 Power Supply
The Mornsun LM50-22B36 is an enclosed AC-DC switching power supply providing a regulated 36V DC output at up to 1.45A, with a rated output power of 52.2W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This model is rated at 52.2W, slightly above the 50W series name. This is a 165-264VAC input model, not a universal 85-264VAC supply - confirm the available mains is within range before installation.
Key Features
Adjustable DC output (32.4-39.6V) for compatible equipment and control circuits.
89% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LM50-22B36
Nominal output
36V DC / 1.45A
Rated output power
52.2W
Output adjustment
32.4-39.6V DC
AC input
165-264VAC
DC input
180-370VDC
Typical efficiency at 230VAC
89%
Maximum capacitive load
800µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
99 × 82 × 30mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LM50-22B36 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (32.4-39.6V) for compatible equipment and control circuits.
89% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.