About this product
Mornsun LM50-10C052412-10 Power Supply
The Mornsun LM50-10C052412-10 is an enclosed AC-DC switching power supply providing +5V DC at up to 3A + +24V DC at up to 1A + +12V DC at up to 1A, with a rated output power of 51W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This is a triple-output supply providing +5V, +24V and +12V rails together. Working current ranges are 0.3-5.0A on +5V, 0.1-1.5A on +24V and 0.1-1.5A on +12V; if the outputs approach their maximum current at the same time, the total output power must not exceed the rated 51W.
Key Features
85% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LM50-10C052412-10
Nominal outputs
+5V DC / 3A; +24V DC / 1A; +12V DC / 1A
Rated output power
51W
AC input
85-264VAC
DC input
120-370VDC
Typical efficiency at 230VAC
85%
Maximum capacitive load
3000 (+5V) / 1000 (+24V) / 1000 (+12V)µF
Input-output isolation test
3000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
99 × 97 × 30mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LM50-10C052412-10 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
85% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.