About this product
Mornsun LM350-10B05 Power Supply
The Mornsun LM350-10B05 is an enclosed AC-DC switching power supply providing a regulated 5V DC output at up to 60A, with a rated output power of 300W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
A 5V model rated at 300W with a very high 60A output current for large LED installations and high-current 5V systems. A 115/230 input selector switch on the unit must be set to match the mains supply before first power-up. A built-in DC fan provides forced-air cooling; keep the vents unobstructed and expect audible fan noise in quiet environments.
Key Features
Adjustable DC output (4.5-5.5V) for compatible equipment and control circuits.
83.5% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Built-in DC fan (forced air cooling). Allow suitable airflow and installation clearance.
Technical Specifications
Model
LM350-10B05
Nominal output
5V DC / 60A
Rated output power
300W
Output adjustment
4.5-5.5V DC
AC input
90-132 / 180-264 (selector switch)VAC
DC input
240-370VDC
Typical efficiency at 230VAC
83.5%
Maximum capacitive load
10000µF
Input-output isolation test
3000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
215 × 115 × 30mm
Cooling
Built-in DC fan (forced air cooling)
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LM350-10B05 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (4.5-5.5V) for compatible equipment and control circuits.
83.5% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Built-in DC fan (forced air cooling). Allow suitable airflow and installation clearance.