About this product
Mornsun LM35-10C051515-10 Power Supply
The Mornsun LM35-10C051515-10 is an enclosed AC-DC switching power supply providing +5V DC at up to 2.5A + +15V DC at up to 1A + -15V DC at up to 0.5A, with a rated output power of 35W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This is a triple-output supply providing +5V, +15V and -15V rails together, suited to analog and op-amp circuits that need a symmetrical rail. If the outputs approach their maximum current at the same time, the total output power must not exceed the rated 35W.
Key Features
81% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LM35-10C051515-10
Nominal outputs
+5V DC / 2.5A; +15V DC / 1A; -15V DC / 0.5A
Rated output power
35W
AC input
85-264VAC
DC input
120-370VDC
Typical efficiency at 230VAC
81%
Maximum capacitive load
2500 (+5V) / 1000 (+15V) / 470 (-15V)µF
Input-output isolation test
3000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
99 × 97 × 30mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LM35-10C051515-10 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
81% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.