About this product
Mornsun LM200-10B36 Power Supply
The Mornsun LM200-10B36 is an enclosed AC-DC switching power supply providing a regulated 36V DC output at up to 5.9A, with a rated output power of 212.4W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This model is rated at 212.4W, slightly above the 200W series name. A 115/230 input selector switch on the unit must be set to match the mains supply before first power-up.
Key Features
Adjustable DC output (32.4-39.6V) for compatible equipment and control circuits.
89% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LM200-10B36
Nominal output
36V DC / 5.9A
Rated output power
212.4W
Output adjustment
32.4-39.6V DC
AC input
90-132 / 180-264 (selector switch)VAC
DC input
240-373VDC
Typical efficiency at 230VAC
89%
Maximum capacitive load
1500µF
Input-output isolation test
3000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
179 × 99 × 30mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LM200-10B36 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (32.4-39.6V) for compatible equipment and control circuits.
89% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.