About this product
Mornsun LM15-23B48 Power Supply
The Mornsun LM15-23B48 is an enclosed AC-DC switching power supply providing a regulated 48V DC output at up to 0.32A, with a rated output power of 15.36W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
A compact 48V supply rated at 15.36W, slightly above the 15W series name. The wide 85-305VAC input range suits equipment fed from unstable mains.
Key Features
Adjustable DC output (42-54V) for compatible equipment and control circuits.
83% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LM15-23B48
Nominal output
48V DC / 0.32A
Rated output power
15.36W
Output adjustment
42-54V DC
AC input
85-305VAC
DC input
100-430VDC
Typical efficiency at 230VAC
83%
Maximum capacitive load
300µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
65 × 55 × 25mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LM15-23B48 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (42-54V) for compatible equipment and control circuits.
83% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.