About this product
Mornsun LM100-10D0524-30 Power Supply
The Mornsun LM100-10D0524-30 is an enclosed AC-DC switching power supply providing +5V DC at up to 5A + +24V DC at up to 3A, with a rated output power of 97W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This is a dual-output supply providing +5V and +24V rails together. Working current ranges are 0.5-7.0A on +5V and 0.3-3.5A on +24V; if both outputs approach their maximum current at the same time, the total output power must not exceed the rated 97W.
Key Features
85% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LM100-10D0524-30
Nominal outputs
+5V DC / 5A; +24V DC / 3A
Rated output power
97W
AC input
90-264VAC
DC input
120-370VDC
Typical efficiency at 230VAC
85%
Maximum capacitive load
5000 (+5V) / 3000 (+24V)µF
Input-output isolation test
3000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
159 × 97 × 30mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LM100-10D0524-30 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
85% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Enclosed metal chassis with screw-terminal connections.
Free air convection. Allow suitable airflow and installation clearance.