About this product
Mornsun LIF480-10B48R2 Power Supply
The Mornsun LIF480-10B48R2 is a DIN-rail AC-DC switching power supply providing a regulated 48V DC output at up to 10A, with a rated output power of 480W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
A high-power 480W DIN-rail supply for 48V loads. Under all conditions the total output power must not exceed the rated 480W. It clips onto a standard 35mm DIN rail inside a control cabinet.
Key Features
Adjustable DC output (48-55V) for compatible equipment and control circuits.
94.5% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LIF480-10B48R2
Nominal output
48V DC / 10A
Rated output power
480W
Output adjustment
48-55V DC
AC input
85-264VAC
DC input
120-370VDC
Typical efficiency at 230VAC
94.5%
Maximum capacitive load
10000µF
Input-output isolation test
3000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
131.5 × 48 × 125mm
Cooling
Free air convection
Selection and Installation
Match the output voltage to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LIF480-10B48R2 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (48-55V) for compatible equipment and control circuits.
94.5% typical efficiency at 230VAC.
3000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.