About this product
Mornsun LI75-20B12R2S Power Supply
The Mornsun LI75-20B12R2S is a DIN-rail AC-DC switching power supply providing a regulated 12V DC output at up to 6.3A, with a rated output power of 75.6W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This 12V model is rated at 75.6W. It clips onto a standard 35mm DIN rail inside a control cabinet.
Key Features
Adjustable DC output (12-14V) for compatible equipment and control circuits.
86% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LI75-20B12R2S
Nominal output
12V DC / 6.3A
Rated output power
75.6W
Output adjustment
12-14V DC
AC input
90-264VAC
DC input
120-370VDC
Typical efficiency at 230VAC
86%
Maximum capacitive load
6000µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
32 × 125 × 87.5mm
Cooling
Free air convection
Selection and Installation
Match the output voltage to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LI75-20B12R2S power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (12-14V) for compatible equipment and control circuits.
86% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.