About this product
Mornsun LI30-20B24PR2 Power Supply
The Mornsun LI30-20B24PR2 is a DIN-rail AC-DC power supply providing a regulated 24V DC output at up to 1.5A, with a rated output power of 36W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
A slim 36W DIN-rail supply, 35mm wide, for cabinets where rail space is tight.
Key Features
Adjustable DC output (21.6-29V) for compatible equipment and control circuits.
88% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LI30-20B24PR2
Nominal output
24V DC / 1.5A
Rated output power
36W
Output adjustment
21.6-29V DC
AC input
85-264VAC
DC input
120-370VDC
Typical efficiency at 230VAC
88%
Maximum capacitive load
1400µF
Input-output isolation test
4000VAC
Operating temperature
-40°C to +70°C, with derating above +50°C
Dimensions
92.66 × 35 × 58mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LI30-20B24PR2 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (21.6-29V) for compatible equipment and control circuits.
88% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.