About this product
Mornsun LI150-20B48PR2 Power Supply
The Mornsun LI150-20B48PR2 is a DIN-rail AC-DC switching power supply providing a regulated 48V DC output at up to 3.2A, with a rated output power of 153.6W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
This 48V model is rated at 153.6W. It clips onto a standard 35mm DIN rail inside a control cabinet.
Key Features
Adjustable DC output (43.2-52.8V) for compatible equipment and control circuits.
91% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
LI150-20B48PR2
Nominal output
48V DC / 3.2A
Rated output power
153.6W
Output adjustment
43.2-52.8V DC
AC input
85-264VAC
DC input
120-370VDC
Typical efficiency at 230VAC
91%
Maximum capacitive load
2400µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C, with derating above +50°C
Dimensions
105 × 90 × 55.4mm
Cooling
Free air convection
Selection and Installation
Match the output voltage to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LI150-20B48PR2 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
Adjustable DC output (43.2-52.8V) for compatible equipment and control circuits.
91% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.