About this product
Mornsun KNX20-22A640 Power Supply
The Mornsun KNX20-22A640 is a DIN-rail AC-DC power supply providing a regulated 30V DC output at up to 640mA, with a rated output power of 19.2W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
A dedicated KNX bus power supply with an integrated choke: the 30V DC output connects directly to the KNX bus line and powers up to 64 bus devices (640mA) in home and building automation systems built to the KNX specification. Note the 180-264VAC input range - this is not a universal 85-264VAC supply.
Key Features
86% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
Model
KNX20-22A640
Nominal output
30V DC / 640mA
Rated output power
19.2W
AC input
180-264VAC
DC input
254-370VDC
Typical efficiency at 230VAC
86%
Maximum capacitive load
2000µF
Input-output isolation test
4000VAC
Operating temperature
-30°C to +70°C
Dimensions
52 × 90 × 58.2mm
Cooling
Free air convection
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun KNX20-22A640 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.
86% typical efficiency at 230VAC.
4000VAC input-to-output isolation test rating.
Protection against short-circuit, over-current and over-voltage faults.
Clips onto a standard 35mm DIN rail inside a control cabinet.
Free air convection. Allow suitable airflow and installation clearance.