Mini MAX3232 RS232 to TTL UART Converter - AA165/RS3999

SKU AA165/RS3999

AA165/RS3999 is a small solder-pad interface board for connecting a microcontroller's logic-level serial UART to an RS232 device.

₹43.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Mini MAX3232 UART-to-RS232 level converter AA165/RS3999 is a small solder-pad interface board for connecting a microcontroller's logic-level serial UART to an RS232 device. It converts the electrical levels in both directions so a transmit path and a receive path can operate together. Use it for serial-device integration, embedded prototypes and learning how logic-level UART differs from RS232. The pictured PCB carries a MAX3232-marked IC, charge-pump capacitors and separate TTL and RS232 markings. This is a bare converter board, not a USB serial adapter, a DB9 cable or an RS485 transceiver. The module does not add galvanic isolation. Power and signal levels Use a regulated 3.3V or 5V supply appropriate for the attached controller's logic requirements. MAX3232-family receivers produce logic outputs related to their supply voltage. A module powered from 5V must not be assumed safe for a 3.3V-only receive input; use a compatible supply and check the controller limits. The + and - power connections are repeated on both sides of this mini-board layout. Power from one side only and share signal ground between the devices. Do not connect independent supplies to the two sides, and do not apply RS232 signal voltages to the power pads or microcontroller GPIO. Connection checklist

Find the printed TTL and RS232 labels before soldering wires.

Connect the controller UART only to the TTL side.

Connect the external RS232 device only to the RS232 side.

Follow the PCB arrows and verify which pads are inputs and outputs. Transmitters must feed receivers, not another transmitter.

Check the external connector's pinout separately; connector gender alone does not establish signal direction.

Set matching baud rate, data bits, parity and stop bits at both ends. Start with a modest speed such as 9600 baud and short wiring, then test the intended rate and cable. Chip-family headline speeds are not a guarantee for every module, cable and installation. If the board becomes hot or draws abnormal current, disconnect power and check polarity, wiring and connected signal levels. Before choosing this module The small pads require soldering and strain relief. Do not infer extra handshake channels from the IC's total driver/receiver count: only the connections brought out on this board are available. USB communication needs a separate suitable USB interface. Package 1 x mini MAX3232 RS232-to-TTL converter board, SKU AA165/RS3999. Headers, cable, connector and controller are not included.

More in Sensor Modules

You might also need