About this product
Mini 5V USB Boost Converter Module
Turn a low-voltage DC source into a 5V USB supply for a small electronics project. This compact step-up board has a USB-A female output socket and input solder pads marked for positive and negative connections. It is useful for battery-powered prototypes and small devices when a suitable low-voltage source is available but the load needs 5V.
Key specifications
Input range: 0.9-5V DC.
Output: fixed 5V DC through a USB socket.
Advertised output capability: up to approximately 500-600mA under suitable input and load conditions.
Small bare-PCB format with an onboard indicator LED.
Available output current depends on input voltage, source capability, wiring and temperature. Do not assume the maximum current is available from a depleted or low-current cell. A lower input voltage requires more input current for the same output power, and conversion losses also need to be allowed for.
Connection and first test
Disconnect the source while soldering or changing wiring. Read the positive and negative markings on the actual board, connect the source with correct polarity and insulate exposed joints. Never apply mains power or an input above 5V. This is a boost converter, not a step-down regulator for a higher-voltage battery pack.
Measure the output before connecting the intended device. Start with a light test load, then increase the load gradually while watching output voltage and temperature. If the voltage drops or the board becomes unusually hot, stop and reassess the source and load rather than relying on the headline current figure.
Battery and USB-use limits
The board supplies boosted power; it is not a lithium battery charger or a complete battery protection system. Use a separate suitable charging and protection arrangement for rechargeable cells. A USB socket alone does not guarantee phone compatibility, fast charging or support for a particular charging protocol.
Package contents
1 x mini DC-DC USB boost converter module. Battery, holder, wires, USB cable and powered device are not included. Gallery views show the same board from different sides. SKU: RS4363.