About this product
ATtiny85 Mini Micro USB Development Board
Build compact sensor, LED and control projects with this ATtiny85-based mini development board. Its micro USB socket provides a convenient connection for power and bootloader programming, while the breakout pads give access to the controller's I/O and supply connections. The supplied loose headers let you choose between breadboard-friendly assembly and direct wiring.
Key features
ATtiny85 8-bit AVR microcontroller with 8KB flash, 512 bytes SRAM and 512 bytes EEPROM.
Six I/O connections for small embedded circuits. USB communication shares two of these signals, so plan pin use around your application.
Analog input, PWM and USI-based serial interfaces for suitable sensor and peripheral projects.
Micro USB connector and onboard power/status LEDs.
Digispark-style Arduino IDE workflow, with the appropriate board package and USB driver setup.
Before you connect
Use a data-capable micro USB cable for programming. This is not an Arduino Uno and does not have the same pin count, memory or library compatibility. The bootloader occupies part of the flash, leaving less than the full 8KB for a sketch. USB upload timing and driver requirements depend on your operating system and installed board support.
Check the printed pin labels before wiring. Use a regulated 5V USB supply for initial testing; do not assume that the microcontroller's voltage limits are the same as the board's external-input limits. Header soldering may be required. Disconnect power before changing wiring.
Package contents
1 x ATtiny85 mini micro USB development board
2 x loose pin-header strips
ATtiny85 8-bit AVR microcontroller with 8KB flash, 512 bytes SRAM and 512 bytes EEPROM.
Six I/O connections for small embedded circuits. USB communication shares two of these signals, so plan pin use around your application.
Analog input, PWM and USI-based serial interfaces for suitable sensor and peripheral projects.
Micro USB connector and onboard power/status LEDs.
Digispark-style Arduino IDE workflow, with the appropriate board package and USB driver setup.