Make an Obstacle Detector for Blind people using Ultrasonic Sensor Module - KT588

SKU KT588

In this project, we have used an ultrasonic sensor and buzzer with Arduino Nano to prevent blind people from being hit by an obstacle up in the air which cannot be detected by

₹1348.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Arduino Nano - 1

Arduino Nano USB Cable – 1

Ultrasonic Sensor Module HC-SR04 - 1

9v Battery -1

Battery snapper -1

B20 Buzzer-1

Jumper Wire (Male to Male) - 20 pcs

Jumper wire (Male to Female) - 20 pcs

Mini Rocker switch-1

830 pt. Breadboard - 1

Introduction In this project, we have used an ultrasonic sensor and buzzer with Arduino Nano to prevent blind people from being hit by an obstacle up in the air which cannot be detected by their stick. HARDWARE REQUIRED

Arduino Nano - 1

Arduino Nano USB Cable – 1

Ultrasonic Sensor Module HC-SR04 - 1

9v Battery -1

Battery snapper -1

B20 Buzzer-1

Jumper Wire (Male to Male) - 20 pcs

Jumper wire (Male to Female) - 20 pcs

Mini Rocker switch-1

830 pt. Breadboard - 1

SOFTWARE REQUIRED Arduino IDE 1.8.5 (programmable platform for Arduino) Click To Download :https://www.arduino.cc/en/Main/Software

SPECIFICATIONS HC SR-04 Ultrasonic Sensor Module

The HC-SR04 ultrasonic sensor uses sonar to measure the distance to an object. It offers excellent range accuracy and stable readings in an easy-to-use package. Its operation is not affected by sunlight or black material like sharp range finders are (soft materials like cloth can be difficult to detect). Module main technical parameters.

Working Voltage: 5V(DC).

Static Current: Less than 2mA.

Output Signal: Electric frequency signal, high-level 5V, low-level 0V. Sensor Angle: Not more than 15 degrees.

Detection Distance: 2 to 450 cm.

High Precision: Up to 0.3cm.

Arduino Nano

CIRCUIT CONNECTION

Connect one GND pin of Arduino Nano with the GND of HC-SR04.

Connect 5V of Arduino Nano with the Vcc pin of HC-SR04.

Connect echo pin of HC-SR04 to the D3 pin of Arduino Nano.

Connect the trig pin of HC-SR04 to the D2 pin of Arduino Nano.

Connect D12 pin of arduino Nano to buzzer’s negative pin.

Connect the A3 pin of Arduino Nano to the buzzer’s positive pin.

Cut the positive wire of battery snapper into two parts and solder a switch between them.

Connect the red wire with the VIN pin of Arduino Nano.

Connect the black wire with any of the left GND pins on Arduino Nano.

CODE Click to see code here: https://drive.google.com/open?id=1oxuRh3Ps0u8oEGEAFFZkl-taMUf230-F

WORKING AND OUTPUT Welcome to the Arduino Based project which consists of buzzer and Ultrasonic Sensor Module. The basic working principle of the Ultrasonic Sensor module is being described here. This Ultrasonic Sensor sends a signal through a trigger pin which when blocked by an obstacle returns high at the echo pin. The time taken between this interval is used to calculate the distance in cm. The buzzer produces a sound that keeps on increasing as the distance from obstacle gets less after a certain set minimum distance limit.

More in Arduino Boards

You might also need