Make an Electronic letter Notifier using shock sensor and RGB led interfacing with Arduino uno - KT890

SKU KT890

Arduino IDE 1.8.5 (programmable platform for Arduino) The knock sensor module detects a knock or tap. If the knock is hard enough, the sensor switch will briefly close, allowing

₹1498.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

KIT INCLUDES:

Arduino uno with USB Cable – 1

Breadboard 400 points – 1

Jumper wires male to male – 40 PIECES

Jumper wires male to female – 40 PIECES

2 Colour Led Module – 1

Knock Sensor – 1

Buzzer – 1

HARDWARE REQUIRED KIT INCLUDES:

Arduino uno with USB Cable – 1

Breadboard 400 points – 1

Jumper wires male to male – 40 PIECES

Jumper wires male to female – 40 PIECES

2 Colour Led Module – 1

Knock Sensor – 1

Buzzer – 1

SOFTWARE REQUIRED

Arduino IDE 1.8.5 (programmable platform for Arduino) Click To Download :https://www.arduino.cc/en/Main/Software

SPECIFICATIONS KNOCK SENSOR MODULE

The knock sensor module detects a knock or tap. If the knock is hard enough, the sensor switch will briefly close, allowing the knock to be detected by a circuit or device such as an Arduino. A built in 10k resistor on the module can be used as a pull-up or pull-down resistor.

2 COLOUR LED MODULE

Operating Voltage 2.0v ~ 2.5v

Using Current 10mA

Diameter 3mm

Package Type Diffusion

Color Red + Green

Beam Angle 150

Wavelength 571nm + 644nm

Luminosity Intensity (MCD) 20-40; 40-80

PIN DESCRIPTION

KNOCK SENSOR MODULE

2 COLOUR LED MODULE

CIRCUIT DESCRIPTION

Connect buzzer’s GND to Arduino’s GND Pin.

Connect buzzer’s positive terminal to arduino’s Digital Pin 7.

Connect the Signal Pin of Knock sensor with arduino Digital Pin 4 of Arduino uno.

Connect Positive terminal of Knock sensor with arduino 5v and GND of Knock sensor to GND pin of arduino uno.

Connect 2 colour Led Module with arduino uno. The first pin of module connects with Digital Pin 5 of arduino and second pin of module connects with Digital Pin 6 of Arduino. And the last pin of module connects to GND of Arduino.

Last step is to upload the code to arduino uno.

CODE Click to see code here: https://docs.google.com/document/d/e/2PACX-1vThUb5AVAmXL4DMrhlUWVgXRlhG603wXARfzy7BpzA9_s-PoPrMl4qW3SfGYQAeuHyd5Y4m0thNyAu0/pub

WORKING Welcome to the Arduino Based Project Electronic Mail Notifier which consists of Knock Sensor and 2 color LED Module. This module consist of a common cathode 3mm red/green LED and a 0Ω resistor, Since operating voltage is 2.0v ~2.5v you may need to use limiting resistors to prevent burnout when connecting to the Arduino. Here we design an circuit which used as an electronic letter box notifier if postman drop a letter in box alarm activated after removing letter reset the alarm. This module is a knock sensor. When you knock it, it can send a momentary signal. We can combine it with Arduino to make some interesting experiment, e.g. electronic drum.

See the Complete Tutorial: https://www.youtube.com/watch?v=PrAjsoAAmqo

More in Arduino Boards

You might also need