Make a wireless weather station using DHT22 sensor NRF24LO1 module and DS3231 RTC interfacing with Arduino Nano and DUE - KT865

SKU KT865

Jumper Wires male to male – 40 piec Arduino IDE ((Programmable platform for Arduino boards) Output pin of dht22 to the d4 pin of Arduino Nano.

₹3780.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

KIT INCLUDES:

Arduino Due with Due cable-1

Arduino Nano with nano cable-1

3.2" TFT display-1

DHT22 sensor -2

NRF24L01 sensor -2

DS3231 RTC sensor -1

Small Breadboard(400 pins)-2

Jumper Wires male to male – 40 piec

Jumper Wires male to female – 40 piece

Powerbank-2 (not included in kit)

Jumper Wire Cable Housing Shell Connector - 2

HARDWARE REQUIRED

Arduino Due with Due cable-1

Arduino Nano with nano cable-1

3.2" TFT display-1

DHT22 sensor -2

NRF24L01 sensor -2

DS3231 RTC sensor -1

Small Breadboard(400 pins)-2

Jumper Wires male to male – 40 piece

Jumper Wires male to female – 40 piece

Powerbank-2 (not included in kit)

Jumper Wire Cable Housing Shell Connector - 2

SPECIFICATION

DS3231 RTC MODULE

SOFTWARE REQUIRED Arduino IDE ((Programmable platform for Arduino boards) You can download it from this link: https://www.arduino.cc/en/Main/Software)

PIN REQUIRED

DS3231 RTC MODULE

NRF24L01 MODULE

ARDUINO NANO

ARDUINO DUE

3.2 TFT DISPLAY

INSTALL LIBRARY

DISPLAY

https://github.com/Bodmer/TFT_HX8357_Due

NRF24L01

https://github.com/nRF24/RF24

DHT22

https://github.com/adafruit/DHT-sensor-library

DS3231

https://github.com/SodaqMoja/Sodaq_DS3231

CIRCUIT CONNECTION

TRANSMITTER CONNECTION 1. Output pin of dht22 to the d4 pin of Arduino Nano. 2. Connect the ground and Vcc of the dht22 and Arduino Nano to the breadboard negative and positive rail. 3. Now connect nrf24lo1 to the circuit (see the image NRF24L01 to Arduino Nano)

RECEIVER CONNECTION

1. In the receiver part we have to use header pins and connect to 7 points on the due board (see picture due connection 2. wires are also connecter to the MOSI,MISO and SCL pin of due board. 3. Now connect the wires to the header pins and fix the 3.2 tft display the the due board. 4. Connect the ground and 3.3V to the breadboard. 5. Next connect the ground and Vcc of dht22 and ds3231 to breadboard negative and positive rail. 6. Connect the i2c pin of due board to the i2c pins of ds3231 (scl 21 to sda and sda 20 to scl) 7. Connect the output of dht22 to 8 pin of due. 8. Now connect the nrf24lo1 to the circuit (see image NRF24L01 to Arduino due)

CODE

TRANSMITTER CONNECTION

https://docs.google.com/document/d/e/2PACX-1vSb2c16m0UbSQmy1QPte3RV399VpqjWEMKjIfZ9Xpa3nnAQ_klSUktRAJpbd2zs-AvoeFoIx1OWK3N4/pub

RECEIVER CONNECTION

https://docs.google.com/document/d/e/2PACX-1vSsuHc_xLNU6ydVmcEIAg3IBYxOQj2k1XPMeUY3-gfG6F5rT0FsOq89xF_HWG6FzQvrZwWrSneCuBdr/pub

NOTE: In receiver code first uncomment (line 54 IN PIC) and upload the then again comment the line and upload it once more (see image comment)

THEN MAKE THIS LINE AS COMMENT

CHANGE THE DATA

OUTPUT In this Arduino Project we build a Wireless Weather Station using the fast and powerful 32bit Arduino Due board. We measure the temperature and the humidity with a couple of DHT22 sensors and we communicate with the remote sensor using the 2.4GHz NRF24L01+ module. it displays the current date and time, the indoor temperature and humidity, and the outdoor temperature and humidity. The readings of the outdoor sensor are updated every second in order to demonstrate that we have a reliable communication link established with the transmitter which is outside at a distance of 5m. The readings of the indoor sensor are updated once every minute. The heart of the project is the fast Arduino Due, and as you can see there is no flickering of the screen when the values are updated

More in Arduino Boards

You might also need