Make a thermometer using DS18B20 temperature sensor module and 16x2 LCD interfacing with arduino uno - KT778

SKU KT778

Resistor (330 ohm and 4.7k) – 2 pieces each Resistor (330 ohm and 4.7k) – 2 pieces each Arduino IDE 1.8.5 (programmable platform for Arduino) This is a waterproofed version of the

₹1425.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

KIT INCLUDES:

Arduino Uno with USB Cable - 1

Breadboard (840 points – 1)

16x2 LCD Display - 1

10K pot - 1

DS18B20 Digital temperature sensor module - 1

Resistor (330 ohm and 4.7k) – 2 pieces each

Jumper wires male to female- 40 pieces

Jumper wires male to male- 40 pieces

HARDWARE REQUIRED

Arduino Uno with USB Cable - 1

Breadboard (840 points – 1)

16x2 LCD Display - 1

10K pot - 1

DS18B20 Digital temperature sensor module - 1

Resistor (330 ohm and 4.7k) – 2 pieces each

Jumper wires male to female- 40 pieces

Jumper wires male to male- 40 pieces

SOFTWARE REQUIRED

Arduino IDE 1.8.5 (programmable platform for Arduino) Click To Download :https://www.arduino.cc/en/Main/Software

SPECIFICATIONS

DS18B20 DIGITAL TEMPERATURE SENSOR

This is a waterproofed version of the DS18B20 Arduino Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125℃ the cable is jacketed in PVC so we suggest keeping it under 100℃. Because they are digital, you don't get any signal degradation even over long distances! The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor. Usable with 3.0-5.5V systems.

Usable with 3.0V to 5.5V power/data

±0.5℃ Accuracy from -10℃ to +85℃

Usable temperature range: -55 to 125℃ (-67℉ to +257℉)

9 to 12-bit selectable resolution

Uses 1-Wire interface- requires only one digital pin for communication

Unique 64 bit ID burned into the chip

Multiple sensors can share one pin

Temperature-limit alarm system

Query time is less than 750ms

3 wires interface:

Red wire - VCC Black wire - GND Yellow wire – DATA

16*2 LCD DISPLAY

LCD Display Mode: STN, Positive, Transflective

Display Color: Deep Blue/ Yellow Green

Viewing Angle: 6H

Driving Method: 1/16 duty, 1/5 bias

Back Light: Yellow-Green LED backlight

Outline Dimension: 803615.8 MAX

PIN DESCRIPTION

16*2 LCD DISPLAY

Symbol

External Connection

Function

VSS

Power Supply

Signal GROUND for lcm

VDD

POWER SUPPLY for logic lcm

V0

Contrast Adjust

RS

MPU

Register Select Signal

RW

MPU

Read/Write Select Signal

E

MPU

Operation Enable Signal

DB0~DB3

MPU

Four Low order bidirectional three state bus lines. Used for data transfer between the MPU and LCM. These four are not used between 4 Bit operations.

DB4~DB7

MPU

Four high order bidirectional Three state bus lines used for data transfer between the MPU

A

LED BKL power Supply

Power Supply for BKL

K

NOTE

Color tone may slightly change by Temperature and Driving Condition.

The Color is defined as the inactive/background color

CIRCUIT CONNECTION

Connect 10k Pot’s positive to positive rail on the breadboard, negative to negative rail on breadboard and signal pin to pin 3 of LCD.

Connect DS18B20 positive to any positive, negative to negative and out pin to Arduino D8 and out pin to 5v via 4.7k resistor.

Connect Arduino 5v to positive rail and ground to negative rail.

Connect

Pin 1 of LCD to gnd Pin 2 to 5v Pin 4 to D7 of arduino Pin 5 to gnd Pin 6 to D6 of arduino Pin 11 to D5 arduino Pin 12 to D4 arduino Pin 13 to D3 arduino Pin 14 to D2 arduino Pin 15 to 5v via 330 ohm Pin 16 to negative rail.

Connect positive to positive and negative to negative rail on the breadboard.

CODE

https://docs.google.com/document/d/e/2PACX-1vSeHIcwXZaeV5zN7gWdf-ZnPYdzfEGg53qfDDt6LLOWF_mXchO-bNczhNLzcgxuJVZ6O9AX-lcJ4umD/pub

APPLICATION

The DS18B20 Temperature Sensor can be used in a variety of applications like:

Thermometers

Temperature Sensitive Systems

Consumer Electronics

Industrial Equipment

Thermostats

More in Arduino Boards

You might also need