About this product
KIT INCLUDES:
Arduino mega with USB Cable - 1
LCD keypad shield - 1
DHT11 temperature and humidity sensor-1
Jumper wire ( Male to Female) – 40 pieces
9v battery with DC jack - 1
HARDWARE REQUIRED
Arduino mega with USB Cable - 1
LCD keypad shield - 1
DHT11 temperature and humidity sensor-1
Jumper wire ( Male to Female) – 40 pieces
9v battery with DC jack - 1
SOFTWARE REQUIRED
Arduino IDE 1.8.5 (programmable platform for Arduino)
Click To Download :https://www.arduino.cc/en/Main/Software
SPECIFICATIONS
16*2 LCD Keypad shield
Operating Voltage:5V
5 Push buttons to supply a custom menu control panel
RST button for resetting arduino program
Integrate a potentiometer for adjusting the backlight
Expanded available I/O pins
Expanded Analog Pinout with standard DFRobot configuration for fast sensor extension
To connect multiple GND and 5V wires soldering may be required
DHT22 temperature and humidity sensor
3 to 5V power and I/O
2.5mA max current use during conversion (while requesting data)
Good for 0-100% humidity readings with 2-5% accuracy
Good for -40 to 125°C temperature readings ±0.5°C accuracy
No more than 0.5 Hz sampling rate (once every 2 seconds)
Body size 15.1mm x 25mm x 7.7mm
LIBRARY REQUIRED
DHT11 Library:
https://github.com/adafruit/DHT-sensor-library
CIRCUIT CONNECTION
Connect ground of DHT11 to the mega ground
Connect Vcc of DHT11 to the mega 5v
Connect data of DHT11 to D22 pin of mega
CODE
https://docs.google.com/document/d/e/2PACX-1vSJMTKXXv0tyWKdqQYSgVpU_QTsEPQQ7kw4mjjdI39w1sjk3MrSrVbDiYG9-KNxV9Nvvv1dDivdelg_/pub
WORKING
This is a simple temperature and humidity monitor device made by use of components like lcd keypad shield , dht11 sensor and arduino mega. The temperature accuracy of dht11 not up to the point but it’s good.