Make a project using Arduino sensor shield using DHT11 temperature and humidity sensor interfacing with Arduino uno - KT722

SKU KT722

Arduino IDE 1.8.5 (programmable platform for Arduino) 3 to 5V power and I/O Good for 0-100% humidity readings with 2-5% accuracy Good for -40 to 125°C temperature readings ±0.5°C

₹1350.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

KIT INCLUDES:

Arduino Sensor shield – 1

DHT11 Humidity temperature sensor module –1

9V Battery - 1

Snapper with DC jack -1

Arduino uno with USB Cable - 1

HARDWARE REQUIRED

Arduino Sensor shield – 1

DHT11 Humidity temperature sensor module –1

9V Battery - 1

Snapper with DC jack -1

Arduino uno with USB Cable - 1

SOFTWARE REQUIRED Arduino IDE 1.8.5 (programmable platform for Arduino) Click To Download :https://www.arduino.cc/en/Main/Software

SPECIFICATIONS DHT11 TEMPERATURE AND HUMIDITY SENSOR Here are the ranges and accuracy of the DHT11:

Humidity Range: 20-90% RH

Humidity Accuracy: ±5% RH

Temperature Range: 0-50 °C

Temperature Accuracy: ±2% °C

Operating Voltage: 3V to 5.5V

3 to 5V power and I/O

2.5mA max current use during conversion (while requesting data)

Good for 0-100% humidity readings with 2-5% accuracy

Good for -40 to 125°C temperature readings ±0.5°C accuracy

No more than 0.5 Hz sampling rate (once every 2 seconds)

Body size 15.1mm x 25mm x 7.7mm

ARDUINO SENSOR SHIELD

IIC interface

32 way steering controller interface

Bluetooth module communication interface

SD card module communication interface

The APC220 Wireless RF module communication interface

RB URF v1.1 ultrasonic sensor interface

12864 LCD serial and parallel interface

PIN DESCRIPTION DHT11 TEMPERATURE AND HUMIDITY SENSOR

ARDUINO SENSOR SHIELD

LIBRARY REQUIRED To run the appropriate code in Arduino IDE you will first have to install the DHT library in you Arduino directory. Download the zip file from (http://hobbyist.co.nz/sites/default/files/WeatherStation/DHT.zip) and place it in your Arduino library folder. The path to Arduino library folder for my computer is Documents/ Arduino/ Libraries Unzip the downloaded file and place it in this folder. After copying the files, the Arduino library folder should have a new folder named DHT containing the dht.h and dht.cpp. After that copy the following code in the Arduino IDE and upload the code.

CIRCUIT CONNECTION

First of all , we put all sensor shield on arduino uno.

Then connect the dht11 sensor on sensor shield port as define in code

Upload the code to arduino uno.

At Last, open the serial monitor for result show to display.

Note: Here we are using Sensor shield but you can use arduino uno because pin connections are same.

CODE Click to see code here: https://docs.google.com/document/d/e/2PACX-1vS3LFfUkBB2V0Jv-mAqWy4XzcUzADiNmE2T0aLQEwn42oYtu4DiltsoLkgP0w0zkK-mIxM8wC-u4PEO/pub

WORKING Welcome to the Arduino Based Humidity check Project which consists of DHT11 Humidity & Temperature Sensor Module and Arduino Sensor Shield. The humidity is sensed using a moisture dependent resistor. It has two electrodes and in between them there exist a moisture holding substrate which holds moisture. The conductance and hence resistance changes with changing humidity. Both these temperatures and humidity a changes are processed by an IC placed on the other side of the board. It calculates the values of both and can transmit those values to a microcontroller using only a single data line. In this project we use sensor shield interfacing with Arduino Uno in which we connect the Dht 11 with sensor shield and reading will be shown on serial monitor. In this project we use sensor shield interfacing with arduino uno in which we connect the dht 11 with sensor shield and reading will shows on serial monitor.

More in Arduino Shields

You might also need