Make a IoT Based Soil Moisture Monitoring system using Soil Moisture Sensor with ESP8266-12e Board - KT568

SKU KT568

Jumper Wires (male to male) – 20 pcs each In this project, we are making an IOT based Soil Moisture Level Indicator using Node MCU ESP8266-12e wi-fi board and Soil Moisture Level

₹1423.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Kit Includes

Node MCU (esp82 66-12e v1.0) Wi-Fi Board -1

NodeMcu USB cable - 1

Soil Moisture Sensor Module -1

Jumper Wires (male to male) – 20 pcs each

830 pt. breadboard - 1

Introduction In this project, we are making an IOT based Soil Moisture Level Indicator using Node MCU ESP8266-12e wi-fi board and Soil Moisture Level Sensor by interfacing with Thingspeak. We will show the measured data on the Thingspeak interface in graph or chart. HARDWARE REQUIRED

Node MCU (esp82 66-12e v1.0) Wi-Fi Board -1

NodeMcu USB cable - 1

Soil Moisture Sensor Module -1

Jumper Wires (male to male) – 20 pcs each

830 pt. breadboard - 1

SOFTWARE REQUIRED Arduino IDE 1.8.10 (programmable platform for Arduino) Click To Download: https://www.arduino.cc/en/Main/Software

SPECIFICATIONS NodeMCU ESP8266 CP2102 NodeMCU WIFI Serial Wireless Module The development board equips the ESP-12E module containing ESP8266 chip having Tensilica Xtensa® 32-bit LX106 RISC microprocessor which operates at 80 to 160 MHz adjustable clock frequency and supports RTOS.

Operating Voltage: 2.5V to 3.6V

On-board 3.3V 600mA regulator

80mA Operating Current

20 µA during Sleep Mode

ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module

Built-in Micro-USB, with flash and reset switches, easy to program

Full I/O port and Wireless 802.11 supported, direct download no need to reset

Arduino compatible works great with the latest Arduino IDE/Mongoose IoT/Micro python

WARNING The ESP8266 requires a 3.3V power supply and 3.3V logic levels for communication. The GPIO pins are not 5V-tolerant! If you want to interface the board with 5V (or higher) components, you’ll need to do some level shifting.

Soil Moisture Sensor Module

The specifications of the soil moisture sensor FC-28 are as follows

Input Voltage

3.3 – 5V

Output Voltage

0 – 4.2V

Input Current

35mA

Output Signal

Both Analog and Digital

The soil Moisture sensor FC-28 has four pins

VCC: For power

A0: Analog output

D0: Digital output

GND: Ground

The Module also contains a potentiometer that will set the threshold value and then this threshold value will be compared by the LM393 comparator. The output LED will light up and down according to this threshold value.

APPLICATION REQUIRED

ThingSpeak - https://thingspeak.com/

CIRCUIT CONNECTION

Connect D0 pin of Soil moisture Module to A0 Pin of NodeMCU ESP8266-12E Board.

Connect V pin of Soil moisture Module to 3V3 Pin of NodeMCU ESP8266-12E Board.

Connect GND pin of Soil moisture Module to GND Pin of NodeMCU ESP8266-12E Board.

CODE Click to see the code https://drive.google.com/open?id=1jyvV81LQAWKVW4H7agD3yqKC414DXR2b

WORKING AND OUTPUT Welcome to the IOT based Soil Moisture Level indicator circuit.

Go to https://thingspeak.com/

Sign up to the account.

After Sign up/Sign in Go My channel and create new channel

now go to the API keys Copy your API key and Paste in your Code.

Then

After uploading the code, you will able to see the readings after measuring the Soil Moisture level in the Soil Moisture level monitoring system using Thingspeak IOT platform in which after a several raised value, it will indicate as a graphical point where the Moisture Level increases above the set value.

Click to watch the tutorial For more tutorials subscribe our channel REES52 on YouTube https://www.youtube.com/channel/UCKuJ1KCjJGat7PrdAcWtu5g

More in WiFi & IoT Modules

You might also need