Make a Dubstep (EDM) Player using Small Sound Sensor Module interfacing with Arduino Uno - KT653

SKU KT653

In this particular project, we will hook up the sound sensor to an array of LED lights which will beat with music, clapping or knocking.

₹1798.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Hardware Required

Arduino Uno With USB Cable - 1

Mini Sound Sensor Module - 1

9V Battery - 1

Snapper With DC Jack - 1

Red Led - 5

White Led - 5

220 Ohm Resistance - 10

Single Stand Wire 2 mt - 1

Bread Board 840 Point - 1

Jumper Wire (male to male) - 40 pcs

Jumper Wire (male to female) - 40 pcs

Introduction In this particular project, we will hook up the sound sensor to an array of LED lights which will beat with music, clapping or knocking. It can be used for controlling various other components. HARDWARE REQUIRED

Arduino Uno With USB Cable - 1

Mini Sound Sensor Module - 1

9V Battery - 1

Snapper With DC Jack - 1

Red Led - 5

White Led - 5

220 Ohm Resistance - 10

Single Stand Wire 2mt - 1

Bread Board 840 Point - 1

Jumper Wire (male to male) - 40 pcs

Jumper Wire (male to a female) - 40 pcs

SOFTWARE REQUIRED Arduino IDE 1.8.5 (programmable platform for Arduino) Click To Download: https://www.arduino.cc/en/Main/Software

SPECIFICATIONS Mini Sound Sensor Module The Small Sound Sensor Module features single channel signal output and uses low level output signals to control sound and light making this module perfect for audible alarm systems.

Dimensions: 40x15x13mm

Weight: 3.06g

LM393 main chip

Electric condenser microphone

Features Single channel signal output

Low level output signal used for sound control light

Great module for sound alarm system

Working voltage: DC 4-6V

Interface definition:

AO: analog output sensor

GND: ground

VCC: Power supply input range: 3V-24V.

DO: Digital Output (comparator output)

Two red LED indication: POWER and SENSOR. POWER: Power is off. SENSOR: When the microphone senses sound reaches a certain value, this LED light.

Arduino Uno

CIRCUIT CONNECTION

Attach the 8 LEDs on the Breadboard.

Connect GND of Arduino Uno with Breadboard for further GND connections.

Connect the negative terminal of LEDs with GND rail of Breadboard via a 220Ω resistor.

Connect the positive terminal of LED 1 with Digital Pin 3 of Arduino via 220Ω resistor.

Connect the positive terminal of LED 2 with Digital Pin 4 of Arduino via 220Ω resistor.

Connect the positive terminal of LED 3 with Digital Pin 5 of Arduino via 220Ω resistor.

Connect the positive terminal of LED 4 with Digital Pin 6 of Arduino via 220Ω resistor.

Connect the positive terminal of LED 5 with Digital Pin 7 of Arduino via 220Ω resistor.

Connect the positive terminal of LED 6 with Digital Pin 8 of Arduino via 220Ω resistor.

Connect the positive terminal of LED 7 with Digital Pin 9 of Arduino via 220Ω resistor.

Connect GND of Small Sound Sensor with GND of Arduino.

Connect VCC of Small Sound Sensor with Pin 5V of Arduino.

Connect Pin D0 of Small Sound Sensor with Digital Pin 2 of Arduino.

Connect Pin A0 of Small Sound Sensor with Analog Pin A0 of Arduino.

CODE https://drive.google.com/open?id=1vsx7XmGi588NWBdz8xCb3cFzZahNM2iS

WORKING Welcome to the Arduino Based Project which consists of Small sound sensor module and its basic functionality is being described here. The microphone sound sensor, as the name says, detects sound. It gives the approximate measurement of how loud a sound is.

After uploading the code, you can clap next to the sensor. If the LED is not lighting up, then you need to change the sensor sensitivity by rotating the potentiometer. Also, you can also adjust the sensitivity so that the LED follows the beat of certain music. Thus, add more LEDs for a more spectacular effect.

More in Arduino Boards

You might also need