Make A Data Logger Using BIG SD CARD MODULE And BMP180 PRESSURE SENSOR - KT975

SKU KT975

Arduino IDE 1.8.5 (programmable platform for Arduino) The SD Card Module is a simple solution for transferring data to and from a standard SD card.This module has SPI interface

₹1425.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

HARDWARE REQUIRED

Arduino uno with USB cable – 1

9v battery with DC jack -1

Big SD card module – 1

BMP180 Pressure and temperature sensor – 1

Jumper Wire male to female – 40 pieces

Jumper Wire Male to male – 40 pieces

Breadboard 840 points – 1

Single stand wire 2m – 1

HARDWARE REQUIRED

Arduino uno with USB cable – 1

9v battery with DC jack -1

Big SD card module – 1

BMP180 Pressure and temperature sensor – 1

Jumper Wire male to female – 40 pieces

Jumper Wire Male to male – 40 pieces

Breadboard 840 points – 1

Single stand wire 2m – 1

SOFTWARE REQUIRED Arduino IDE 1.8.5 (programmable platform for Arduino) Click To Download: https://www.arduino.cc/en/Main/Software

SPECIFICATIONS

Big SD Card Module

The SD Card Module is a simple solution for transferring data to and from a standard SD card.This module has SPI interface which is compatible with any SD card and it use 5V or 3.3V power supply which is compatible with Arduino UNO/Mega.SD module has various applications such as data logger, audio, video, graphics.

Operating voltage 5V

SPI Communication method

SD card Socket

Supports FAT16 and FAT32

Break out board for standard SD card.

Contains a switch to select the flash card slot

Sits directly on a Arduino

Also be used with other microcontrollers

BMP180 Pressure and Temperature sensor This pressure sensor is a BMP-180 based digital barometric pressure sensor module and is functional compatible with older BMP-085 digital pressure sensor with less power consumption smaller in size and more accurate.

Supply Voltage:1.8V to 3.6V

Low power consumption:0.5uA at 1Hz

I2C interface

Max I2C Speed: 3.5Mhz

Pressure Range: 300hPa to 1100hPa (+9000m to -500m)

CIRCUIT CONNECTION

The BMP180 is connected to the arduino as follows:

Once you have the BMP180 connected, test and make sure your code is working, and you are getting good pressure and temperature readings. Once that is working, you are ready to connect your SD card Reader/Writer. The SD card reader should be connected as follows:

LIBRARY & CODE Install this library as follows: Sketch -> Include Library -> add .zip Library SD https://drive.google.com/open?id=14XeOIpZXd5gEfq7_N0y3rpAMTRr1ZpnK SPI:Inbuilt Library you can add this using IDE Sketch -> Include Library -> Manage Library -> Search for SPI -> Install the latest version Or Click to downloadhttps://drive.google.com/open?id=1sYq1UCDgBf1_Njkg8Bt7_R2rq1u0ghpC

WIRE https://drive.google.com/open?id=1Ej-R75OikJAlHrj275zYvKNzDN3cm0zi BMP180 https://drive.google.com/open?id=1MehZlFQpO_HgZFF5hOCNnV4nr4NlHjj_ Click to see the code or copy the link : https://drive.google.com/open?id=1Bz3csaVULx0ruUnG9MKlFk7c1oWclp_J

WORKING

If you have the BMP180 and the SD card connected correctly, this should create a file called PTData.txt on the card, and write comma delimited data to the file. Note that if the file does not exist on the card, the command:

mySensorData = SD.open("PTData.txt", FILE_WRITE);

will create the file. If the file already exists, this command will append data to the existing file. If you want to start with a clean new data set, erase the old PTData file. When you run the program, you end up with a PTData.txt file on the SD card. When you have finished logging your data, you can pop the card out, put it into your PC, and then import the data into excel. You should now be able to plot, graph or analyze the data using all the powerful features of Excel. If you want to see the saved file(reading of BMP180) , the saved data reading will be stored in SD Card .so to see the file go to MY COMPUTER then you will see the location as given in image below (USB Drive (F:))

Click on the File then you will able to see the PTdata file.

SERIAL MONITOR READING

PTdata

More in Arduino Boards

You might also need