About this product
Description:
Compact L9110 dual H-bridge module drives two DC motors or one 4-wire stepper. 2.5–12 V input, up to 800 mA per channel. Ideal for hobby robotics & embedded systems.
The L9110 Motor Driver Module is a compact, efficient dual H-bridge driver designed for small motors and stepper applications. It allows you to drive two DC motors or one 4-wire (2-phase) stepper motor with ease, all at currents up to 800 mA per channel under typical operating conditions.
This module works in a wide voltage range (2.5 V to 12 V), making it well suited to both 3.3 V and 5 V microcontroller systems. With its simple input interface and onboard protection, it’s a popular choice for makers, robotics, IoT devices, and DIY motion control projects.
Specifications:
Driver scheme
Dual H-bridge
Supply voltage (Vcc)
2.5 V – 12 V
Continuous current per channel
800 mA
Peak / short current tolerance
Higher (transient)
Logic interface
TTL / CMOS compatible inputs
Saturation voltage
Low (varies by load)
Mounting size / board dimension
~29.2 × 23 mm
Operating temperature
Approx. –20 °C to +80 °C
Motor types supported
DC motors, 4-wire 2-phase stepper
⚠️ Note: Always check your motor’s stall current and peak current draw; ensure you don’t exceed what the driver can safely handle.
Feature:
Dual H-bridge configuration: drive two independent DC motors or one 4-wire stepper motor.
Wide operating voltage: 2.5 V to 12 V input supply.
800 mA continuous current per channel (with some margin for short peaks).
Low quiescent current and lower saturation voltage, enhancing efficiency.
TTL / CMOS compatible logic, ideal for direct connection to microcontrollers.
Integrated clamp diodes or protections to manage inductive loads.
Compact PCB footprint (≈ 29.2 × 23 mm) with mounting holes.
Package Included:
1 x L9110S H-bridge Stepper Motor Dual DC Motor Driver Controller Board