JYQD V7.3E2 DC 12V-36V 500W Brushless Motor Controller Hall Motor Balanced Car Driver Board- RS1091

SKU RS1091

This is a JYQD V7.3E2 DC 12V-36V 500W Brushless Motor Controller Hall Motor Balanced Car Driver Board. This Brushless Motor Controller DC 12-36V 500W PWM Driver Board is used for

₹2488.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

This is a JYQD V7.3E2 DC 12V-36V 500W Brushless Motor Controller Hall Motor Balanced Car Driver Board. This Brushless Motor Controller DC 12-36V 500W PWM Driver Board is used for the 3-phase brushless sensor-less motor, but not suit for all 3-phase brushless sensor-less motors directly.

If the driving effect is not good (such as starting jitter, reversing, the motor no-load working current is too large, the speed is not stable, the efficiency is low, and can’t start up with a load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect.

Specification:

Model: JYQD-V7.3E2

Operating Voltage: DC 12V-36V

Operating Current: ≤15A

Drive Power: ≤500W

Operating Temperature: -20~85℃

Speed Control: 0.1V~5V or PWM Input

Over-current Protection: Yes

Steering Control: Yes

Pin Description:

1. Control Port:

Z/F: Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR:Speed control port. Analogue voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm, connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

GND:Used for Drive board internal control

2. Power Port:

MA: Motor phase A

MB: Motor phase B

MC: Motor phase C

GND: DC-

VCC: DC +

Caution:

Confirm that the voltage and power parameters of the motor do not exceed the range specified.

Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequences are corresponding, you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect.

JYQD-V7.3E2 is a driver board without housing and heatsink, it can drive the motor below 100 watts without any heatsink but needs normal ventilation.

The 5V output port on the drive board is forbidden to connecting to external power equipment. It is only applicable to an external potentiometer or switch for speed adjustment, commutation and enabling operation

Package Included:

1 x JYQD V7.3E2 DC 12V-36V 500W Brushless Motor Controller Hall Motor Balanced Car Driver Board

Specifications

ModelJYQD-V7.3E2
Operating VoltageDC 12V-36V
Operating Current≤15A
Drive Power≤500W
Operating Temperature-20~85℃
Speed Control0.1V~5V or PWM Input
Over-current ProtectionYes
Steering ControlYes

More in DC & Geared Motors

You might also need

10 RPM Johnson Geared Motor High Torque Motor - ER008

10 RPM Johnson Geared Motor High Torque Motor - ER008

This johnson geared motor provides torque which falls intermediate to the torques by center shaft gear motors and side shaft dc gear motors, at a reasonable cost.It is a simple DC

₹480.00 GST added at checkout